We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular lithium-polymer battery pack, light grey finish, 49.6 by 30 by 6.7 mm, 20 g

Cameron Sino HS35 1100mAh 3.7V Li-Polymer Battery AEC603048

SKU CH-KN4N-SGSDC

Replacement lithium-polymer battery for HS35 two-way radios delivering 1100mAh at 3.7V

  • Specifications49.60 x 30.00 x 6.70
  • Typelithium_polymer
  • Battery Pack49.60 x 30.00 x 6.70
  • Battery Typelithium_polymer
  • Battery Capacity1100.00 milliamp_hours
  • Battery Voltage3.70 volts
  • 1100 mAh capacity powers the HS35 radio through long shifts
  • 7 V lithium-polymer chemistry matches the original voltage exactly
  • 6 × 30.0 × 6.7 mm form factor fits the battery compartment precisely
  • ISO 9001, RoHS and CE certifications confirm regulated manufacturing quality
  • Integrated protection circuit guards against over-charge, over-discharge and short circuits

Replacement Battery for HS35 Radio

The Cameron Sino HS35 is a 3.7V lithium-polymer cell rated at 1100mAh and 4.07Wh. It matches the original AEC603048 specifications and carries ISO9001, RoHS and CE certification. The pack measures 49.60 x 30.00 x 6.70mm and weighs 20.0g. It is built for two-way radio users who need a direct-fit replacement.

Installation notes

Many online videos demonstrate the swap and show it is straightforward. The critical step is seating the connector fully so the decoded chip communicates with the radio. A loose connector is the most common reason a new pack appears dead on arrival. The supplier advises two or three full charge cycles before judging run-time. Avoid low-quality chargers to protect the protection circuit.

Compatibility check

Verify the radio model is HS35 and the original battery part number is AEC603048 before ordering. Confirm the connector orientation and pin layout match the old pack. Ensure the battery compartment can accept the 49.60 x 30.00 x 6.70mm dimensions. Do not use the cell above 60°C or 140°F, and never disassemble or expose it to fire or water.

Highlights

  • 1100 mAh capacity powers the HS35 radio through long shifts
  • 7 V lithium-polymer chemistry matches the original voltage exactly
  • 6 × 30.0 × 6.7 mm form factor fits the battery compartment precisely
  • ISO 9001, RoHS and CE certifications confirm regulated manufacturing quality
  • Integrated protection circuit guards against over-charge, over-discharge and short circuits

Specifications

BrandCameron Sino
ModelHS35
Part NumberAEC603048
Specifications49.60 x 30.00 x 6.70
Typelithium_polymer
Battery Pack49.60 x 30.00 x 6.70
Battery Typelithium_polymer
Battery Capacity1100.00 milliamp_hours
Battery Voltage3.70 volts

Questions about this item

How do I confirm the HS35 battery is working correctly after installing it in my two-way radio?

After fitting the 1100mAh 3.7V pack the radio should power up and hold a charge through normal use; the manufacturer notes that two or three full charge and discharge cycles bring the cell to its best performance.

What comes in the package and is anything else required to use the AEC603048 battery?

The box contains one lithium-polymer cell measuring 49.60 x 30.00 x 6.70 mm with a pre-fitted connector and shock-absorbing foam; no separate charger or cable is included, so you reuse the radio's existing charging setup.

Which capacity version of the HS35 replacement battery should I choose for my device?

This model is offered in a single 1100mAh / 4.07Wh configuration rated at 3.7V, matching the original specification for the HS35 two-way radio.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.