Unique-Bargains 9V Battery Clip Connector 3pcs 13cm 2.1mm x 5.5mm
- Connectors
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Replacement lithium-polymer pack for Foxpro drones delivering 6700 mAh at 11.1 V
This lithium polymer battery replaces the original Foxpro LITH/CHG PN34318 pack. It fits the Banshee, CS24, CS24B, CS24C, Hellfire, Krakatoa, Krakatoa-II, Screaming Banshee, Shockwave, Snow Commando, X1, X24, X2S and XWave models. The fully decoded chip communicates with the caller exactly like the factory unit. Installation is straightforward with the original connector.
The pack delivers a nominal 11.1 volts through the standard Foxpro connector. Voltage drops as the cells discharge, so output power falls gradually during a long stand. The built-in protection circuit stops charging at the safety limit and cuts discharge if voltage falls too low. No balancing lead is exposed; the internal board manages cell balance automatically.
At 6700 milliampere hours and 74.37 watt hours the pack powers a typical calling sequence for multiple sessions before recharge. Cold weather reduces available capacity, so winter stands will be shorter than summer ones. The protection circuit prevents over-discharge, but leaving the pack empty for weeks can still cause permanent capacity loss.
| Brand | Cameron Sino |
|---|---|
| Model | banshee, cs24, cs24b, cs24c, hellfire, krakatoa, krakatoa-ii, screaming banshee, shockwave, snow commando, x1, x24, x2s, xwave |
| Part Number | LITH/CHG, PN34318 |
| Specifications | 68.00 x 55.00 x 32.00 |
| Type | lithium_polymer |
| Battery Pack | 68.00 x 55.00 x 32.00 |
| Battery Type | lithium_polymer |
| Battery Capacity | 6700 milliamp_hours |
| Battery Voltage | 11.1 volts |
The PN34318 battery is compatible with Foxpro banshee, cs24, cs24b, cs24c, hellfire, krakatoa, krakatoa-ii, screaming banshee, shockwave, snow commando, x1, x24, x2s and xwave models.
The 6700mAh 11.1V pack stores 74.37Wh, which typically powers a Foxpro electronic caller through several calling sequences before needing a recharge.
The pack uses the Foxpro LITH/CHG connector, which keys the battery to the listed models and prevents connection to non-compatible units.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?