Cameron Sino DMW-BCM13 950mAh camera battery
Replacement 950 mAh 3.7 V battery for Lumix FT, TS, TZ and ZS series cameras
- Pack41.50 x 34.00 x 8.50
- Capacity950.00 milliamp_hours
- 950mAh capacity powers extended shooting sessions
- 7V lithium-ion cell matches original voltage exactly
- Decoded chip enables full camera communication
- Fits 13 Panasonic Lumix part numbers including DMW-BCM13
- ISO9001, RoHS and CE certified for safety
Replacement battery for Lumix cameras
The Cameron Sino DMW-BCM13 is a 950 mAh lithium-ion cell built to replace the original Panasonic battery in a wide range of Lumix compact models including the FT5, TS5, TS6, ZS30, ZS35, ZS40, ZS45, ZS50, ZS60, ZS100, TZ40, TZ41, TZ55, TZ60 and TZ61 series. It operates at 3.7 V and delivers 3.52 Wh of energy.
Decoded chip and protection circuits
A fully decoded chip allows the battery to communicate with the camera exactly like the original unit, so remaining-capacity indicators and charging routines work normally. Integrated safeguards protect against overcharge, over-discharge, over-voltage and short circuits, and each cell is tested to ISO 9001, RoHS and CE standards before it leaves the factory.
Capacity and runtime limits
At 950 mAh the pack provides enough power for several hundred typical shots or a few hours of mixed shooting and playback, but extended video recording or continuous burst modes will drain it more quickly. The compact 41.50 × 34.00 × 8.50 mm form factor and 21.6 g weight keep the camera balanced, yet the fixed capacity means users planning all-day outings should carry a spare.
Highlights
- 950mAh capacity powers extended shooting sessions
- 7V lithium-ion cell matches original voltage exactly
- Decoded chip enables full camera communication
- Fits 13 Panasonic Lumix part numbers including DMW-BCM13
- ISO9001, RoHS and CE certified for safety
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | Lumix DMC-FT5, Lumix DMC-FT5A, Lumix DMC-FT5D, Lumix DMC-FT5K, Lumix DMC-FT5S, Lumix DMC-LZ40, Lumix DMC-LZ40K, Lumix DMC-TS5, Lumix DMC-TS5A, Lumix DMC-TS5D, Lumix DMC-TS5K, Lumix DMC-TS5S, Lumix DMC-TS6, Lumix DMC-TZ40, Lumix DMC-TZ40K, Lumix DMC-TZ40R, Lumix DMC-TZ40S, Lumix DMC-TZ40W, Lumix DMC-TZ41, Lumix DMC-TZ55, Lumix DMC-TZ60, Lumix DMC-TZ61, Lumix DMC-ZS100K, Lumix DMC-ZS30, Lumix DMC-ZS30K, Lumix DMC-ZS30R, Lumix DMC-ZS30S, Lumix DMC-ZS30W, Lumix DMC-ZS35K, Lumix DMC-ZS35W, Lumix DMC-ZS40K, Lumix DMC-ZS40S, Lumix DMC-ZS45K, Lumix DMC-ZS50K, Lumix DMC-ZS60K |
| Part Number | DMW-BCM13, DMW-BCM13E, DMW-BCM13PP |
| Pack | 41.50 x 34.00 x 8.50 |
| Capacity | 950.00 milliamp_hours |
Questions about this item
When will the DMW-BCM13 battery need replacement?
After 2 or 3 full charge and discharge cycles the 950mAh cell reaches its best performance, and it will need replacing once it no longer holds enough charge for your shooting sessions.
What limits the DMW-BCM13 during long video recording?
The 950mAh capacity and 3.7V output set the runtime ceiling; continuous recording stops when the cell is depleted.
Does the DMW-BCM13 get hot or noisy during all-day use?
The battery has no moving parts so it stays silent, and the built-in over-voltage and short-circuit protection keeps heat low during extended operation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



