Cameron Sino DCT-50-RB 2600mAh 7.4V lithium-ion battery
Replacement lithium-ion battery for DCT-50 devices, 2600mAh at 7.4V with ISO9001, RoHS and CE certification
- Specifications1
- Typelithium_ion
- Battery Pack1
- Battery Typelithium_ion
- Battery Capacity2600.00 milliamp_hours
- Battery Voltage7.40 volts
- Replacement battery for DCT-50 models
- 2600 mAh capacity at 7.4 volts
- ISO 9001, RoHS and CE certified
- Built-in protection against overcharge and short circuit
- Fully decoded chip works like the original
Replacement Battery for DCT-50
This lithium-ion pack replaces the original DCT-50 battery in compatible electronic scales. It delivers 2600mAh at 7.4 volts for 19.24Wh of capacity. A fully decoded chip ensures the meter reads charge levels accurately. The pack is certified to ISO9001, RoHS and CE standards.
Steady Power Under Load
The cell chemistry maintains a stable 7.4V output during extended weighing sessions rather than sagging after a few readings. Overcharge, over-discharge, over-voltage and short-circuit protection circuits guard the pack through repeated cycles. Performance peaks after two or three full charge and discharge sequences.
Drop-In Fit and Protection
The pack matches the original dimensions and connector so it seats without modification. Shock-absorbing foam in the retail box guards the battery during transit and storage. Installation videos are available online for first-time users. Do not disassemble, expose to fire or water, or store above 60°C.
Highlights
- Replacement battery for DCT-50 models
- 2600 mAh capacity at 7.4 volts
- ISO 9001, RoHS and CE certified
- Built-in protection against overcharge and short circuit
- Fully decoded chip works like the original
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | DCT-50 |
| Part Number | DCT-50-RB |
| Specifications | 1 |
| Type | lithium_ion |
| Battery Pack | 1 |
| Battery Type | lithium_ion |
| Battery Capacity | 2600.00 milliamp_hours |
| Battery Voltage | 7.40 volts |
Questions about this item
Does the DCT-50-RB generate heat or noise when powering a scale continuously?
The lithium-ion pack has no moving parts and produces no audible noise; normal warmth during discharge is expected but it stays within safe operating limits.
What must I already own for this 7.4 V 2600 mAh battery to work in my device?
You need a compatible DCT-50 scale with the matching DCT-50-RB connector and a charger that supplies the correct voltage for lithium-ion cells.
Will the DCT-50-RB function properly in an older DCT-50 unit that has been in storage?
Yes, the fully decoded chip communicates exactly like the original battery, so the scale recognises it immediately after proper installation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



