Peerless Industrial Group
Peerless Industrial Group Tire Chains Single Bus & RV V-Bar PK2 QG2821
$67.99
0.00081403BTC
In stock
Cameron Sino CUH-ZCT1E 1300mAh 3.7V battery charger
Replacement lithium-ion battery for DualShock 4 controllers, 1300mAh capacity with built-in protection circuitry
- Compatible with multiple DualShock 4 controller models
- 1300 mAh capacity restores original playtime
- 7 V lithium-ion cell matches factory voltage
- Built-in protection against overcharge and short circuit
- Certified to ISO 9001, RoHS and CE standards
Compatible Sony DualShock 4 models
This replacement battery fits Sony CUH-ZCT1E, CUH-ZCT1H, CUH-ZCT1J, CUH-ZCT1K, CUH-ZCT1M and CUH-ZCT1U controllers. It matches the original LIP1522 part number and uses a fully decoded chip. The lithium-ion cell delivers 1300mAh at 3.7V for standard wireless playtime.
Capacity and voltage match
The single specification that decides fit is the 1300mAh capacity at 3.7V, matching the factory 4.81Wh rating. A different capacity or voltage would prevent the controller from reporting charge correctly or could damage the charging circuit.
Installation requirements
The pack measures 53.70 x 34.20 x 8.10mm and weighs 24.2g, matching the original housing. You need a small Phillips screwdriver and a plastic pry tool to open the controller shell. No soldering is required; the connector plugs directly into the mainboard. Avoid charging with low-quality third-party adapters and do not store the battery above 60°C.
Highlights
- Compatible with multiple DualShock 4 controller models
- 1300 mAh capacity restores original playtime
- 7 V lithium-ion cell matches factory voltage
- Built-in protection against overcharge and short circuit
- Certified to ISO 9001, RoHS and CE standards
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | CUH-ZCT1E, CUH-ZCT1H, CUH-ZCT1J, CUH-ZCT1K, CUH-ZCT1M, CUH-ZCT1U, Dualshock 4 Wireless Controlle |
Questions about this item
What does the 1300 mAh capacity mean for actual play time on a DualShock 4?
The 1300 mAh cell stores 4.81 Wh at 3.7 V, matching the original Sony LIP1522 specification, so you should see the same hours per charge as a factory-fresh controller.
Which connector standard does the battery use and what voltage does it deliver?
It uses the same internal connector as the Sony LIP1522 and supplies the standard 3.7 V nominal voltage the DualShock 4 expects.
Will the 53.70 x 34.20 x 8.10 mm dimensions fit inside my CUH-ZCT1E controller shell?
Yes, those measurements are identical to the original pack, so the battery sits in the compartment without forcing the case or the screw posts.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
