We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular lithium-polymer battery pack, dark grey finish, compact form factor, gold connector visible

Cameron Sino Coppernic C-One e-ID XGK-C-ONE-E-ID BP13-001080 3450mAh 3.7V battery

SKU CH-2KHT-F8SVV

Replacement lithium-polymer battery for Coppernic C-One e-ID and XGK-C-ONE-E-ID barcode scanners, 3450 mAh at 3.7 V

  • Specifications54.00 x 34.50 x 16.55
  • Typelithium_polymer
  • Battery Pack54.00 x 34.50 x 16.55
  • Battery Typelithium_polymer
  • Battery Capacity3450 milliamp_hours
  • Battery Voltage3.7 volts
  • 3450 mAh capacity powers the e-ID scanner through a full shift
  • 7 V lithium-polymer chemistry matches the original BP13-001080 specification
  • 54 × 34.5 × 16.55 mm form factor fits the XGK-C-ONE-E-ID battery bay exactly
  • Built-in protection guards against overcharge, over-discharge and short circuits
  • ISO 9001 certified production ensures consistent quality and safe operation

Drop-in replacement for Coppernic C-One e-ID

This lithium-polymer pack matches the original BP13-001080, E00913001 and PCT3200 part numbers. It delivers 3450 mAh at 3.7 volts in a 54.00 x 34.50 x 16.55 mm form factor. A fully decoded chip ensures the scanner recognises the battery immediately.

Low self-discharge chemistry runs cool in daily use

The cell maintains stable voltage during long scanning shifts without noticeable heat build-up. Integrated protection guards against overcharge, over-discharge, over-voltage and short circuits. At 66.5 g it adds minimal weight to the handheld unit.

Restores runtime on ageing e-ID

Replace the pack when the original no longer holds a full shift charge or shows swelling. The jump is worth it if the scanner still meets workflow needs but battery life has dropped below usable levels. Not for users whose scanner chassis or charging cradle is damaged.

Highlights

  • 3450 mAh capacity powers the e-ID scanner through a full shift
  • 7 V lithium-polymer chemistry matches the original BP13-001080 specification
  • 54 × 34.5 × 16.55 mm form factor fits the XGK-C-ONE-E-ID battery bay exactly
  • Built-in protection guards against overcharge, over-discharge and short circuits
  • ISO 9001 certified production ensures consistent quality and safe operation

Specifications

Brandcameron sino
ModelCoppernic C-One e-ID XGK-C-ONE-E-ID
Part NumberCoppernic BP13-001080 E00913001 PCT3200
Specifications54.00 x 34.50 x 16.55
Typelithium_polymer
Battery Pack54.00 x 34.50 x 16.55
Battery Typelithium_polymer
Battery Capacity3450 milliamp_hours
Battery Voltage3.7 volts

Questions about this item

How do I install the 3450mAh 3.7V lithium polymer battery in the Coppernic C-One e-ID scanner, and what step is often missed?

Open the scanner's battery compartment, align the 54.00 x 34.50 x 16.55mm pack, and press the connector firmly until it clicks; the step often missed is not fully seating the connector, which prevents the decoded chip from communicating with the device.

What maintenance will this BP13-001080 replacement battery need over its life?

No routine maintenance is required; after 2 or 3 full charge and discharge cycles the 12.77Wh cell reaches peak capacity, and the built-in protection circuit handles overcharge, over-discharge and short-circuit safety automatically.

What limit appears first when the scanner runs continuously on this 3450mAh pack?

The 12.77Wh capacity sets the runtime ceiling; under sustained scanning the voltage will drop to the protection threshold and the scanner will shut down until the cell is recharged.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.