We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular lithium-ion battery pack with label showing 4400mAh 16.28Wh 3.7V

Cameron Sino CN3 Replacement Battery 4400mAh 16.28Wh

SKU CH-H3HP-7V420 MPN CN3

Replacement lithium-ion battery delivering 4400mAh at 3.7V for Intermec CN3, CN3E, CN4 and CN4E scanners

  • Scan Engine1D
  • Included CablesUSB Cable
  • Batterylithium_ion
  • Weight174.0
  • 4400mAh capacity powers extended scanning sessions
  • 28Wh lithium-ion cell matches original voltage at 3.7V
  • Certified to ISO9001, RoHS and CE standards for safety
  • 60 x 69.60 x 17.90mm form factor fits CN3, CN3E, CN4, CN4E
  • Built-in protection guards against overcharge, over-discharge and short circuits

Replacement Battery for Handheld Scanners

This lithium-ion battery replaces the original power pack in Intermec CN3, CN3E, CN4 and CN4E barcode scanners. It delivers 4400 mAh capacity at 3.7 volts and matches the factory dimensions of 78.60 x 69.60 x 17.90 mm. The cell includes a decoded chip that communicates with the scanner exactly like the OEM unit. Certified to ISO9001, RoHS and CE standards.

Users Needing Direct OEM Replacement

Technicians maintaining fleets of Intermec CN3-series devices will find this a drop-in substitute for part numbers 318-016-001, 318-016-002, AB15, AB16 and AB9. It is not suited for scanners outside this model family or for equipment requiring a different voltage or form factor. Buyers who need a higher-capacity cell or a different chemistry should look elsewhere.

4400 mAh Capacity at 3.7 V

The single figure that determines compatibility is the 4400 mAh / 16.28 Wh rating at 3.7 volts. If the original battery label shows the same capacity and voltage, this unit will fit and function. A mismatch in either value means the scanner will not operate correctly.

Highlights

  • 4400mAh capacity powers extended scanning sessions
  • 28Wh lithium-ion cell matches original voltage at 3.7V
  • Certified to ISO9001, RoHS and CE standards for safety
  • 60 x 69.60 x 17.90mm form factor fits CN3, CN3E, CN4, CN4E
  • Built-in protection guards against overcharge, over-discharge and short circuits

Specifications

BrandCameron Sino
Series78.60 x 69.60 x 17.90mm
ModelCN3, CN3E, CN4, CN4E
Part Number318-016-001, 318-016-002, AB15, AB16, AB9
Scan Engine1D
Included CablesUSB Cable
Batterylithium_ion
Weight174.0

Questions about this item

How long will the 4400 mAh capacity last during continuous scanning shifts?

The 4400 mAh lithium-ion cell delivers 16.28 Wh at 3.7 V; actual runtime depends on the scanner's power draw and scan frequency.

Does the battery run hot or need active cooling when the scanner is docked all day?

No active cooling is required; the pack includes overcharge, over-discharge, over-voltage and short-circuit protection to limit heat during extended charging.

Which Intermec hand-held models accept this CN3 pack without modification?

It fits Intermec CN3, CN3E, CN4 and CN4E units that originally used part numbers 318-016-001, 318-016-002, AB15, AB16 or AB9.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.