AGM Global Vision Fuzion TM25-384 Fusion Thermal Monocular
- Monoculars
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Replacement lithium-polymer battery for Chison ECO 1–6 ultrasound scanners, 5200 mAh at 14.4 V with built-in protection circuits
This lithium polymer battery replaces the original power pack in Chison ECO 1, ECO 2, ECO 3, ECO 5 and ECO 6 portable ultrasound units. It matches the original part numbers 33-00012-00 and BT-2500. The cell delivers 5200mAh at 14.4V for 74.88Wh of capacity. It is intended for medical professionals who need a reliable spare or replacement for field and clinical use.
The pack uses the same connector and physical layout as the factory battery, so installation is a direct swap. A fully decoded chip communicates with the device exactly like the original unit. Overcharge, over-discharge, over-voltage and short-circuit protection circuits are integrated. The manufacturer notes that two or three full charge cycles are needed before the battery reaches its best performance.
Confirm that your ultrasound system is one of the listed ECO models and that the original battery carries part number 33-00012-00 or BT-2500. Check that the connector on your existing pack matches the replacement. Avoid using low-quality third-party chargers, as they can reduce the service life of the new battery.
| Brand | Cameron Sino |
|---|---|
| Model | ECO 1, ECO 1 Portable Ultrasound, ECO 2, ECO 2 Portable Ultrasound, ECO 3, ECO 3 Portable Ultrasound, ECO 5, ECO 5 Portable Ultrasound, ECO 6, ECO 6 Portable Ultrasound |
| Part Number | 33-00012-00, BT-2500 |
| Specifications | 135.00 x 36.00 |
| Type | lithium_polymer |
| Battery Pack | 135.00 x 36.00 |
| Battery Type | lithium_polymer |
| Battery Capacity | 5200.00 milliamp_hours |
| Battery Voltage | 14.40 volts |
The battery should power the ECO 1 and show a stable 14.4 V reading; a new pack reaches full performance after two or three complete charge and discharge cycles.
One lithium polymer battery pack measuring 135.00 x 36.00 mm is included; no additional components are required for installation.
Match the original battery part number 33-00012-00 or BT-2500; this pack is listed as compatible with ECO 1, ECO 2, ECO 3, ECO 5 and ECO 6.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?