Cameron Sino BP5 E5E45A BP7 141DF1 PL052535 370mAh 3.7V standard battery
Replacement lithium-ion cell delivers 370 mAh at 3.7 V for compatible BP5 E5E45A and BP7 141DF1 medical devices
- Specifications34.00 x 24.50 x 5.00
- Battery Pack34.00 x 24.50 x 5.00
- Battery Capacity370 milliamp_hours
- Battery Voltage3.7 volts
- 370 mAh capacity delivers reliable runtime for medical devices
- 7 V output matches original equipment specifications exactly
- 00 × 24.50 × 5.00 mm form factor fits BP5 E5E45A and BP7 141DF1 models
- ISO 9001, RoHS and CE certifications confirm regulated manufacturing quality
- Fully decoded chip enables plug-and-play installation without extra setup
Replacement Battery for BP5 E5E45A and BP7 141DF1
This Cameron Sino battery replaces the original BP5 E5E45A and BP7 141DF1 packs used in medical equipment. It delivers 370mAh capacity at 3.7V with a fully decoded chip that matches original specifications. The lithium-ion cell measures 34.00 x 24.50 x 5.00mm and weighs 8g. It is a direct-fit replacement certified to ISO9001, RoHS and CE standards.
Protection Features and Packaging
The battery includes overcharge, over-discharge, over-voltage and short-circuit protection circuits to extend service life. A new unit reaches optimal performance after two or three full charge and discharge cycles. The package contains shock-absorbing foam to protect the cell during transport. No additional accessories or software are bundled with this single-cell replacement.
Compatibility Checks Before Ordering
Verify the model number of your device and the part number PL052535 on your existing battery before purchase. Ensure the connector aligns correctly when installing the new cell. Avoid using low-quality third-party chargers, which can reduce battery lifespan. Do not disassemble the pack, expose it to fire or water, or store it above 60°C.
Highlights
- 370 mAh capacity delivers reliable runtime for medical devices
- 7 V output matches original equipment specifications exactly
- 00 × 24.50 × 5.00 mm form factor fits BP5 E5E45A and BP7 141DF1 models
- ISO 9001, RoHS and CE certifications confirm regulated manufacturing quality
- Fully decoded chip enables plug-and-play installation without extra setup
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | BP5 E5E45A, BP7 141DF1 |
| Part Number | PL052535 |
| Specifications | 34.00 x 24.50 x 5.00 |
| Battery Pack | 34.00 x 24.50 x 5.00 |
| Battery Capacity | 370 milliamp_hours |
| Battery Voltage | 3.7 volts |
Questions about this item
How often should the 370mAh lithium-ion cell be cycled to maintain capacity?
The manufacturer recommends 2 or 3 full charge and discharge cycles when the battery is new, then normal use will keep it at peak performance.
What is the first limit reached during continuous operation — voltage drop or thermal cutoff?
The cell is rated at 3.7 volts and must not be stored above 60 °C; sustained loads that push temperature toward that limit will trigger protection before voltage sags.
Does the pack generate noticeable heat or noise when powering a medical device all day?
The 8 g lithium-ion pack has no moving parts and runs silently; under typical loads it stays barely warm thanks to the built-in over-voltage and short-circuit safeguards.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



