We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular lithium-ion battery with blue wrapper and gold contacts

Cameron Sino BP1730-2009 2200mAh 3.7V battery

SKU CH-SK0D-MEABV

Replacement battery for Fluke 1730 energy loggers and three-phase analysers, 2200 mAh at 3.7 V with built-in protection circuits

  • Specifications74.35 x 54.34 x 8.30
  • Battery Pack74.35 x 54.34 x 8.30
  • Battery Capacity2200 milliamp_hours
  • 2200mAh capacity powers 1730 Energie Logger for extended field sessions
  • 7V 8.14Wh lithium cell matches original voltage and energy rating
  • 35×54.34×8.30mm form factor fits 1730 Three-Phase Electrical En equipment exactly
  • ISO9001 RoHS CE certified with overcharge over-discharge short-circuit protection built in
  • Fully decoded chip enables drop-in replacement without device modification

Replacement Battery for 1730 Energy Logger

This 3.7 V lithium-ion cell replaces the original pack in Fluke 1730, 1730 Energie Logger and 1730 Three-Phase Electrical Energy Analyzer instruments. It matches part numbers 4146702, 4389436, BP1730 and BP1730-2009 so technicians can restore portable power without soldering or adapter cables. The pack is supplied new and ready for the initial conditioning cycles.

Single-Cell Voltage and Form-Factor Limits

The battery delivers a nominal 3.7 V from a single pouch cell measuring 74.35 x 54.34 x 8.30 mm. That fixed voltage and physical envelope mean it only fits devices designed for this exact pack; it cannot be used in equipment that requires a different cell count, chemistry or connector layout. Installers must verify the original part number before fitting.

2200 mAh Capacity and Practical Runtime

Rated at 2200 mAh (8.14 Wh), the pack powers a 1730 series logger through typical recording sessions before needing recharge. Runtime falls when the instrument drives its display, communications module or sensor excitation continuously. The protection circuit prevents over-charge, over-discharge and short-circuit damage, but capacity will still degrade after repeated deep cycles.

Highlights

  • 2200mAh capacity powers 1730 Energie Logger for extended field sessions
  • 7V 8.14Wh lithium cell matches original voltage and energy rating
  • 35×54.34×8.30mm form factor fits 1730 Three-Phase Electrical En equipment exactly
  • ISO9001 RoHS CE certified with overcharge over-discharge short-circuit protection built in
  • Fully decoded chip enables drop-in replacement without device modification

Specifications

BrandCameron Sino
Model1730, 1730 Energie Logger, 1730 Three-Phase Electrical En
Part Number4146702, 4389436, BP1730, BP1730-2009
Specifications74.35 x 54.34 x 8.30
Battery Pack74.35 x 54.34 x 8.30
Battery Capacity2200 milliamp_hours

Questions about this item

Should I choose the 2200mAh version or a different capacity for my Fluke 1730?

This model is only offered in a 2200mAh / 8.14Wh capacity. Match the part numbers 4146702 or 4389436 on your original battery to confirm fit.

What runtime does the 2200mAh 3.7V rating give inside a 1730 Energie Logger?

The pack stores 8.14 watt-hours. Actual logging time depends on the instrument's power draw; the battery simply replaces the original 3.7V cell with the same capacity.

Does the BP1730-2009 use a standard connector or a proprietary interface?

It uses the same connector as the original Fluke 1730 battery. The fully decoded chip communicates with the logger exactly like the factory pack, so no adapter is needed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.