We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular black camera battery with gold contacts, 70 by 45 by 42 millimetres

Cameron Sino BP-U30 Camera Battery 2600mAh 14.8V

SKU CH-45C8-GGDDV

Replacement 2600 mAh 14.8 V battery for Sony XDCAM EX and PMW series cameras

  • Pack69.70 x 45.10 x 41.50
  • Capacity2600.00 milliamp_hours
  • 2600 mAh capacity powers long shoots
  • 8 V output matches original BP-U30 spec
  • Fully decoded chip works like the factory battery
  • ISO9001, RoHS and CE certified for safety
  • Fits Sony PMW-EX, PXW-FS and XDCAM EX models

Replacement BP-U30 for Sony XDCAM EX

The Cameron Sino BP-U30 is a 14.8 V 2600 mAh lithium-ion battery built for Sony professional camcorders including the PMW-EX1, PMW-EX3, PMW-F3, PXW-FS5 and PXW-FS7. It matches the original BP-U30 form factor at 69.70 x 45.10 x 41.50 mm and weighs 211.0 g. A fully decoded chip reports remaining capacity to the camera menu exactly like the OEM pack.

Upgrade from depleted OEM packs

When an original BP-U30 no longer holds a full day’s charge, this 38.48 Wh replacement restores runtime without changing chargers or workflow. The jump is worth it if your current pack drops below 80 % capacity or triggers early low-battery warnings during long shoots. It is not for operators who need higher-capacity BP-U60 or BP-U90 bricks for extended runtimes.

Simple swap, watch connector alignment

The battery slides into the camera’s native slot and clicks home; no tools or firmware updates are required. Most issues come from forcing the connector before the guide rails engage, which can bend pins. Charge fully twice before critical use to calibrate the fuel gauge. Avoid low-quality third-party chargers — they can shorten cycle life.

Highlights

  • 2600 mAh capacity powers long shoots
  • 8 V output matches original BP-U30 spec
  • Fully decoded chip works like the factory battery
  • ISO9001, RoHS and CE certified for safety
  • Fits Sony PMW-EX, PXW-FS and XDCAM EX models

Specifications

Brandcameron sino
ModelHD422, PMW-100, PMW-150, PMW-150P, PMW-160, PMW-200, PMW-300, PMW-EX1, PMW-EX160, PMW-EX1r, PMW-EX260, PMW-EX280, PMW-EX3, PMW-EX3R, PMW-F3, PMW-F3K, PMW-F3L, PXW-FS5, PXW-FS7, PXW-X180, XDCAM EX
Part NumberBP-U30
Pack69.70 x 45.10 x 41.50
Capacity2600.00 milliamp_hours

Questions about this item

Will the 69.70 x 45.10 x 41.50 mm pack fit the BP-U30 slot on my PMW-EX3?

Yes, those are the exact dimensions of the BP-U30 form factor used by the PMW-EX3 and the other listed Sony models.

What is the installation step users most often miss when fitting this 14.8 V battery?

Fully seat the connector until it clicks; a partially inserted plug will prevent the camera from recognising the decoded chip.

How should I maintain the 2600 mAh capacity over time?

Run two or three full charge and discharge cycles when new, avoid storing above 60 °C, and recharge every few months if unused.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.