We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular lithium polymer battery pack, dark grey finish, labelled Cameron Sino, 99 by 55.8 by 23.1 mm

Cameron Sino BMP21 Plus M210 2400mAh 7.4V lithium polymer battery

SKU CH-C34W-SJGE4

Replacement lithium polymer battery for Brady BMP21 Plus, BMP21-Lab, M210 and M210-Lab label printers, 2400 mAh at 7.4 V

  • Specifications99.40 x 55.80 x 23.10
  • Typelithium_polymer
  • Battery Pack99.40 x 55.80 x 23.10
  • Battery Typelithium_polymer
  • Battery Capacity2400.00 milliamp_hours
  • Battery Voltage7.40 volts
  • Replacement battery fits Brady BMP21 Plus, M210 and Lab models
  • 2400 mAh capacity at 7.4 V delivers 17.76 Wh of energy
  • ISO 9001 certified production ensures consistent quality and safety
  • Fully decoded chip works like the original with built-in protection circuits
  • Compact 99.40 x 55.80 x 23.10 mm pack weighs 106.0 g

Compatible Brady label printers

The Cameron Sino lithium polymer battery replaces the original power pack for Brady BMP21 Plus, BMP21-Lab, M210 and M210-Lab models. It matches part numbers 170420, BMP21-PLUS-BATT and G6120161. The cell delivers 2400mAh at 7.4V for 17.76Wh total energy. Dimensions are 99.40 x 55.80 x 23.10mm and weight is 106.0g.

Field technicians needing drop-in power

Workers who rely on Brady handheld label makers for wire marking, panel identification or asset tagging will find this a direct fit. The fully decoded chip communicates with the printer exactly like the factory unit. Buyers whose device uses a different voltage, connector or form factor should verify the part number before ordering.

Steady output through a full shift

The 2400mAh capacity supports extended printing sessions without voltage sag during continuous label feeds. Integrated protection guards against overcharge, over-discharge, over-voltage and short circuits, preserving cell health over repeated cycles. Performance stabilises after two or three full charge-discharge cycles.

Highlights

  • Replacement battery fits Brady BMP21 Plus, M210 and Lab models
  • 2400 mAh capacity at 7.4 V delivers 17.76 Wh of energy
  • ISO 9001 certified production ensures consistent quality and safety
  • Fully decoded chip works like the original with built-in protection circuits
  • Compact 99.40 x 55.80 x 23.10 mm pack weighs 106.0 g

Specifications

BrandCameron Sino
ModelBMP21 Plus, BMP21-Lab, M210, M210-Lab
Part Number170420, BMP21-PLUS-BATT, G6120161
Specifications99.40 x 55.80 x 23.10
Typelithium_polymer
Battery Pack99.40 x 55.80 x 23.10
Battery Typelithium_polymer
Battery Capacity2400.00 milliamp_hours
Battery Voltage7.40 volts

Questions about this item

Which Brady label printers does this 2400mAh 7.4V lithium polymer battery fit?

It is a direct replacement for the Brady BMP21 Plus, BMP21-Lab, M210 and M210-Lab models.

Will the original charger that came with my BMP21 Plus charge this replacement battery correctly?

Yes, the built-in fully decoded chip makes the battery behave identically to the original, so the factory charger works without any change.

How can I confirm the battery is operating normally after I install it?

After two or three full charge and discharge cycles the printer should report normal capacity and run for the expected time on a single charge.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.