We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular lithium-ion battery pack, dark finish, 66.60 by 37.00 by 18.60 mm

Cameron Sino Bissell ICONpet 2288 BRVXBBB 6800mAh 3.7V

SKU CH-X5RD-KZDVV

Replacement lithium-ion battery for Braven BRV-X speaker, 6800 mAh 3.7 V with ISO 9001, RoHS and CE certification

  • Specifications66.60 x 37.00 x 18.60
  • Battery Pack66.60 x 37.00 x 18.60
  • Battery Capacity6800 milliamp_hours
  • Battery Voltage3.7 volts
  • Replacement battery for Braven BRV-X and BRVXBBB speaker
  • 6800mAh capacity delivers 25.16Wh at 3.7V for long playback
  • ISO9001, RoHS and CE certified for safety compliance
  • Fully decoded chip works like the original battery
  • Compact 66.60 x 37.00 x 18.60mm size fits device perfectly

Replacement Battery for Braven BRV-X Speaker

This 6800mAh 3.7V lithium-ion pack replaces the original BRVXBBB battery in Braven BRV-X portable speakers. It matches the factory dimensions of 66.60 x 37.00 x 18.60mm and weighs 99.0g for a direct fit. A built-in decoded chip communicates with the speaker electronics exactly like the original cell. The pack is certified to ISO9001, RoHS and CE standards.

Thermals Noise and Power Draw

Lithium-ion chemistry delivers the rated 25.16Wh capacity with low internal resistance, so the speaker maintains output volume without excessive voltage sag. The protection circuit guards against overcharge, over-discharge, over-voltage and short circuits, keeping cell temperature stable during normal playback. No active cooling is required and the battery adds no audible noise to the speaker enclosure.

Upgrade From Degraded Original Cells

This pack restores runtime lost to aged or swollen factory batteries that no longer hold a full charge. The jump is worth it when the speaker cuts out early, shows reduced maximum volume or fails to power on after storage. It is not for users needing higher capacity than 6800mAh or a different voltage platform. Installation follows widely available online guides and typically requires only basic tools.

Highlights

  • Replacement battery for Braven BRV-X and BRVXBBB speaker
  • 6800mAh capacity delivers 25.16Wh at 3.7V for long playback
  • ISO9001, RoHS and CE certified for safety compliance
  • Fully decoded chip works like the original battery
  • Compact 66.60 x 37.00 x 18.60mm size fits device perfectly

Specifications

Brandcameron sino
ModelBissell ICONpet Cordless 2288 BRVXBBB
Part NumberSkullcandy BRV-X
Specifications66.60 x 37.00 x 18.60
Battery Pack66.60 x 37.00 x 18.60
Battery Capacity6800 milliamp_hours
Battery Voltage3.7 volts

Questions about this item

How do I install this battery in my Braven BRV-X speaker and what step is often missed?

Open the speaker, disconnect the old pack, connect the new battery's connector firmly until it clicks, then close the casing; the step people miss is fully seating the connector.

What maintenance will this 6800mAh lithium-ion pack need over time?

Perform two or three full charge and discharge cycles when new, avoid low-quality chargers, keep storage temperature below 60 °C, and do not disassemble or expose to fire or water.

At what temperature limit does this 3.7 V battery risk damage during sustained use or storage?

Do not store or operate above 60 °C (140 °F); exceeding this limit can shorten life or cause safety issues.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.