We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular medical battery pack, dark plastic casing, wire connector visible

Cameron Sino BIS VISTA 2600mAh 7.4V standard battery

SKU CH-JQJ6-FN5WB

Replacement battery for Aspect Medical BIS VISTA monitoring systems, 2600 mAh at 7.4 V with built-in protection circuits

  • Specifications67.80 x 37.30 x 19.50
  • Battery Pack67.80 x 37.30 x 19.50
  • Battery Capacity2600 milliamp_hours
  • Battery Voltage7.4 volts
  • Compatible with Aspect Medical BIS VISTA monitors
  • 2600 mAh capacity powers extended monitoring sessions
  • 4 V output matches original equipment specs
  • ISO 9001, RoHS and CE certified for medical use
  • Built-in protection guards against overcharge and short circuits

Compatible medical monitor battery

The Cameron Sino BIS VISTA battery replaces the original power cell in Aspect Medical System BIS VISTA, BIS Vista Monitoring, BIS Vista Monitoring System and Vista View BIS Monitor devices. It matches part numbers 185-0152, 186-0208 and OM0084. The pack uses a fully decoded chip so the host system recognises it immediately.

Thermal and power profile

Rated at 7.4 volts and 2600 milliampere-hours the cell stores 19.24 watt-hours of energy. The lithium-ion chemistry delivers stable voltage during normal monitoring sessions without excessive heat. Integrated protection guards against overcharge, over-discharge, over-voltage and short circuits.

Sustained load behaviour

Under continuous monitoring duty the battery maintains consistent output until the protection circuit triggers a safe shutdown. The 96.0 gram pack fits the 67.80 by 37.30 by 19.50 millimetre compartment exactly. Performance reaches its optimum after two or three full charge cycles.

Highlights

  • Compatible with Aspect Medical BIS VISTA monitors
  • 2600 mAh capacity powers extended monitoring sessions
  • 4 V output matches original equipment specs
  • ISO 9001, RoHS and CE certified for medical use
  • Built-in protection guards against overcharge and short circuits

Specifications

BrandCS Cameron Sino
ModelBIS VISTA
Part Number185-0152
Specifications67.80 x 37.30 x 19.50
Battery Pack67.80 x 37.30 x 19.50
Battery Capacity2600 milliamp_hours
Battery Voltage7.4 volts

Questions about this item

How do I install the BIS VISTA battery and what step do people often miss?

Slide the 67.80 x 37.30 x 19.50 mm pack into the compartment, then press the connector firmly until it clicks — the step most people miss is verifying the plug is fully seated before closing the cover.

What maintenance will this 2600mAh 7.4V pack need later?

After 2 or 3 full charge and discharge cycles the battery reaches peak capacity; thereafter no routine maintenance is required beyond avoiding storage above 60 °C and using only a quality charger.

What limit appears first during continuous monitoring use?

The 19.24 Wh capacity sets the runtime ceiling — under sustained load the monitor will shut down once the 2600mAh charge is depleted.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.