Cameron Sino Battery LSQ-88 1100mAh 3.7V for Spare H720 MiniDVR 3
Replacement lithium-ion battery delivering 1100 mAh at 3.7 V for Spare H720 and MiniDVR 3 cameras
- Pack53.10 x 38.40 x 8.00
- Capacity1100 milliamp_hours
- CompatibilityCamera
- 1100 mAh capacity powers extended recording sessions
- 7 V lithium-ion cell matches original voltage exactly
- 10 × 38.40 × 8.00 mm form factor fits H720 and MiniDVR 3
- Built-in protection guards against overcharge, over-discharge and short circuits
- ISO9001, RoHS and CE certified for safety compliance
Direct Replacement Battery
The Cameron Sino LSQ-88 is a 1100mAh 3.7V lithium-ion pack built to fit Spare H720 and MiniDVR 3 cameras. It matches the original cell specifications so the device recognises it immediately and runs without errors. Photographers and field operators who need a dependable spare for long shoots will find it a practical drop-in solution.
Certified Build And Simple Swap
Each unit carries ISO9001, RoHS and CE certification and includes overcharge, over-discharge, over-voltage and short-circuit protection circuits. The pack measures 53.10 x 38.40 x 8.00mm and weighs 32.0g, matching the factory footprint so the battery door closes flush. Installation requires only aligning the connector; no soldering or tools are needed.
Capacity And Chemistry Limits
The 1100mAh rating delivers 4.07Wh of energy, which suits intermittent recording but will require recharging during extended sessions. Lithium-ion chemistry performs best between 0°C and 60°C; storing the pack above 60°C or 140°F accelerates permanent capacity loss. Expect two to three full charge cycles before the gauge reports maximum runtime accurately.
Highlights
- 1100 mAh capacity powers extended recording sessions
- 7 V lithium-ion cell matches original voltage exactly
- 10 × 38.40 × 8.00 mm form factor fits H720 and MiniDVR 3
- Built-in protection guards against overcharge, over-discharge and short circuits
- ISO9001, RoHS and CE certified for safety compliance
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | Battery For Spare |
| Part Number | LSQ-88 |
| Pack | 53.10 x 38.40 x 8.00 |
| Capacity | 1100 milliamp_hours |
| Compatibility | Camera |
Questions about this item
What voltage and capacity does the LSQ-88 battery provide?
The battery delivers 3.7 V and 1100 mAh, giving 4.07 Wh of energy for compatible cameras.
What are the exact dimensions and weight of the LSQ-88 pack?
It measures 53.10 x 38.40 x 8.00 mm and weighs 32.0 g, matching the original battery size.
How is the LSQ-88 installed, and what common step is missed?
Align the connector and press it in fully; the step often missed is ensuring the connector seats completely before closing the compartment.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



