We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular lithium-polymer battery pack, dark finish, 67 by 41.7 by 9 millimetres

Cameron Sino Battery GLM120C GLM150-27C 2450mAh 3.7V

SKU CH-NRNF-X85F1

Replacement lithium-polymer battery for GLM120C and GLM150-27C equipment, 2450 mAh at 3.7 V with overcharge and short-circuit protection

  • Specifications67.20 x 41.70 x 9.00
  • Typelithium_polymer
  • Battery Pack67.20 x 41.70 x 9.00
  • Battery Typelithium_polymer
  • Battery Capacity2450.00 milliamp_hours
  • Battery Voltage3.70 volts
  • 2450mAh capacity powers survey equipment longer
  • 7V lithium-polymer chemistry matches original specifications
  • 20 x 41.70 x 9.00mm form factor fits GLM120C and GLM150-27C models
  • ISO9001, RoHS and CE certified for safe operation
  • Built-in protection guards against overcharge, over-discharge and short circuits

Replacement battery for GLM120C and GLM150-27C

This lithium-polymer cell matches the original 3.7 V specification and delivers 2450 mAh capacity. It fits equipment that uses part numbers 1 600 A00 E0F or 1600A00E0F. The pack measures 67.20 x 41.70 x 9.00 mm and weighs 45.0 g. A built-in protection circuit guards against overcharge, over-discharge, over-voltage and short circuits.

Thermals, noise and power draw

The battery operates silently and generates negligible heat during normal discharge. Internal resistance is low enough to support the host device's typical current profile without voltage sag. No active cooling is required; the cell relies on the equipment's own enclosure for passive heat dissipation. Self-discharge is minimal when the unit is stored at room temperature.

Build integration and freedoms

The fully decoded chip communicates with the host exactly like the original pack, so no firmware updates are needed. Installation is straightforward and supported by many online videos. The package includes shock-absorbing foam for transit protection. Buyers who need a higher capacity or a different voltage will have to look elsewhere.

Highlights

  • 2450mAh capacity powers survey equipment longer
  • 7V lithium-polymer chemistry matches original specifications
  • 20 x 41.70 x 9.00mm form factor fits GLM120C and GLM150-27C models
  • ISO9001, RoHS and CE certified for safe operation
  • Built-in protection guards against overcharge, over-discharge and short circuits

Specifications

BrandCameron Sino
ModelGLM120C, GLM150-27C
Part Number1 600 A00 E0F, 1600A00E0F
Specifications67.20 x 41.70 x 9.00
Typelithium_polymer
Battery Pack67.20 x 41.70 x 9.00
Battery Typelithium_polymer
Battery Capacity2450.00 milliamp_hours
Battery Voltage3.70 volts

Questions about this item

How do I install this 67.20 x 41.70 x 9.00 mm battery in my GLM120C, and what step causes problems?

Align the connector precisely with the device socket before pressing the pack into the compartment; the step most users miss is verifying the plug is fully seated, which prevents a no-power condition.

What maintenance will this 2450mAh lithium polymer pack need later?

No scheduled maintenance is required; after 2 or 3 full charge and discharge cycles the cells reach peak capacity, and the pack should be replaced once runtime drops below your workflow needs.

What limit appears first when this 3.7 V battery runs continuously in a GLM150-27C?

The 9.07 Wh capacity sets the runtime ceiling; under sustained load the pack will hit its discharge cut-off before thermal or voltage protection activates.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.