Cameron Sino Battery for Yeacomm P21 4G Z2200B 3350mAh
Replacement battery for the Yeacomm P21 4G hotspot with 3350 mAh capacity and 3.7 V output
- Typeaaa
- Capacity3350 mAh
- 3350 mAh capacity powers the Yeacomm P21 4G longer
- 40 Wh energy rating matches original specification
- ISO 9001 RoHS CE certified for safety compliance
- Fully decoded chip works like the original battery
- Shock-protective foam packaging guards the cell in transit
Replacement Battery for Yeacomm P21 4G
This replacement cell is built for the Yeacomm P21 4G hotspot and matches the original Z2200B part number. It delivers a capacity of 3350 mAh at 3.7 volts for 12.40 Wh of energy. The pack includes a fully decoded chip so the device recognises it like the factory unit. It suits users who need a direct swap for a worn or lost original battery.
Certified Safety and Thermal Behaviour
The cell carries ISO9001, RoHS and CE certifications confirming baseline safety and environmental compliance. Built-in protection guards against overcharge, over-discharge, over-voltage and short-circuit events during normal operation. The lithium chemistry runs at the standard 3.7 V nominal voltage without special cooling requirements. No noise or active thermal management is involved with this passive component.
Protected Packaging and Support Terms
The unit ships inside shock-absorbing foam to prevent transit damage to the cell. Buyers receive a twelve-month warranty period and a thirty-day money-back window from the supplier. Email support is offered with a twenty-four-hour response target for installation questions. There are no bundled tools, cables or software included with this battery.
Highlights
- 3350 mAh capacity powers the Yeacomm P21 4G longer
- 40 Wh energy rating matches original specification
- ISO 9001 RoHS CE certified for safety compliance
- Fully decoded chip works like the original battery
- Shock-protective foam packaging guards the cell in transit
Specifications
| Brand | cameron sino |
|---|---|
| Series | 68.50 x 18.60 x 18.60mm |
| Model | Yeacomm P21 4G |
| Type | aaa |
| Part Number | Yeacomm Z2200B |
| Capacity | 3350 mAh |
Questions about this item
How do I install the 3350 mAh battery into my Yeacomm P21 4G without damaging the decoded chip?
Power off the hotspot, remove the rear cover, disconnect the old pack, align the new Z2200B connector and press gently until it clicks, then refit the cover before powering on.
What maintenance will the 3.7 V lithium-ion cell need after months of daily charging?
No scheduled maintenance is required; store at roughly half charge if unused for weeks, avoid extreme heat, and replace the pack once runtime drops noticeably below the rated 12.40 Wh.
Which limit appears first during continuous 4G hotspot use — thermal throttle or capacity drop?
The protection circuit will cut output if temperature or voltage exceeds safe thresholds, so thermal limits trigger before any permanent capacity loss.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
MPBATT 1715mAh Cell Phone Battery for iPhone 6S 4.7" + Repair Tools
- 1200 mAh
MPBATT Google Nexus 5 LG D820 D821 2300mAh 3.8V 8.74Wh Cell Phone Battery
- 1200 mAh
MPBATT BL-51YF 3000mAh cell phone battery for LG G4 H810 H811 LS991 VS986 US991 Stylo
- 1200 mAh



