We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Flat rectangular nickel-zinc battery pack, matte finish, cable connector visible

Cameron Sino Battery for Valve Index Controller PT822048 1000mAh 3.8V

SKU CH-3X52-JMD4A

Replacement nickel-zinc battery for Valve Index Controller, 1000mAh at 3.8V with ISO9001, RoHS and CE certification

  • Specifications49.20 x 19.50 x 8.00
  • Typenickel_zinc
  • Battery Pack49.20 x 19.50 x 8.00
  • Battery Typenickel_zinc
  • Battery Capacity1000.00 milliamp_hours
  • Battery Voltage3.80 volts
  • Direct replacement for Valve Index Controller PT822048
  • 1000 mAh capacity keeps sessions running longer
  • 8 V nickel-zinc chemistry matches original spec
  • 20 × 19.50 × 8.00 mm fits the controller bay
  • ISO9001, RoHS and CE certified for safety

Replacement Battery for Valve Index Controller

The Cameron Sino battery replaces the original power cell in a Valve Index controller. It uses nickel-zinc chemistry rated at 1000mAh and 3.8V. The pack measures 49.20 x 19.50 x 8.00mm and weighs 16.0g. A decoded chip ensures the controller recognises the cell as genuine.

Upgrading from a Depleted Original Cell

Controllers that no longer hold a charge or shut down mid-session benefit from this direct swap. The jump is worth it when the factory cell drops below usable runtime after repeated cycles. Installation follows public video guides and requires no soldering or firmware changes.

Capacity and Runtime Headroom

The 1000mAh capacity restores the controller to its design runtime for typical indoor play sessions. Protection circuits guard against overcharge, over-discharge, over-voltage and short circuits. The cell is not suited for devices requiring higher voltage or different form factors.

Highlights

  • Direct replacement for Valve Index Controller PT822048
  • 1000 mAh capacity keeps sessions running longer
  • 8 V nickel-zinc chemistry matches original spec
  • 20 × 19.50 × 8.00 mm fits the controller bay
  • ISO9001, RoHS and CE certified for safety

Specifications

BrandCameron Sino
ModelIndex Controller
Part NumberPT822048
Specifications49.20 x 19.50 x 8.00
Typenickel_zinc
Battery Pack49.20 x 19.50 x 8.00
Battery Typenickel_zinc
Battery Capacity1000.00 milliamp_hours
Battery Voltage3.80 volts

Questions about this item

What are the exact dimensions of this 49.20 x 19.50 x 8.00 mm battery for the Valve Index Controller?

The replacement cell measures 49.20 mm long, 19.50 mm wide and 8.00 mm thick, matching the original PT822048 pack size.

Which connector orientation must be aligned when installing the nickel-zinc pack into the controller?

The built-in plug only fits one way; line up the keyed connector with the controller socket before pressing it fully home.

After how many charge cycles does the 1000 mAh nickel-zinc cell reach its rated capacity?

The manufacturer states the battery achieves best performance after 2 or 3 complete charge and discharge cycles.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.