We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Thin rectangular lithium-ion battery with smooth grey finish and connector ribbon

Cameron Sino Battery for Sony PRS-600 800mAh 3.7V

SKU CH-HWJK-6A0ZJ

Replacement lithium-ion battery for Sony PRS-600 e-readers, 800 mAh at 3.7 V

  • Specifications63.52 x 34.12 x 3.65
  • Battery Pack63.52 x 34.12 x 3.65
  • Battery Capacity800 milliamp_hours
  • Battery Voltage3.7 volts
  • Ready-to-use replacement for Sony PRS-600 series
  • 800 mAh capacity restores original run-time
  • 7 V lithium-ion cell matches factory voltage
  • Slim 3.65 mm profile fits the e-reader chassis
  • Built-in protection guards against over-charge and short circuits

Direct replacement for PRS-600 series

This Cameron Sino lithium-ion cell fits the Sony PRS-600, PRS-600/BC and PRS-600/RC e-readers. It delivers 800mAh at 3.7 volts and measures 63.52 x 34.12 x 3.65mm. The pack weighs 17.0g and includes a fully decoded chip that communicates with the device like the original battery.

Upgrade from a depleted original cell

When the factory battery no longer holds a charge through a normal reading session, this 2.96Wh unit restores the rated runtime. The jump is worth it if the e-reader shuts down early or requires constant tethering to a charger. It is not for owners whose device still meets daily page-turn needs on the original pack.

Straightforward swap with care on the connector

Installation follows the many online guides: open the rear cover, disconnect the old pack and attach the new connector. The main pitfall is seating the plug off-centre, which leaves the reader dead on boot. A new cell reaches full capacity after two or three complete charge cycles. Avoid low-quality chargers to preserve cycle life.

Highlights

  • Ready-to-use replacement for Sony PRS-600 series
  • 800 mAh capacity restores original run-time
  • 7 V lithium-ion cell matches factory voltage
  • Slim 3.65 mm profile fits the e-reader chassis
  • Built-in protection guards against over-charge and short circuits

Specifications

Brandcameron sino
ModelBissell ICONpet Cordless 2288 PRS-600/RC PRS-600/BC
Part NumberSkullcandy A98927554931 A98941654402
Specifications63.52 x 34.12 x 3.65
Battery Pack63.52 x 34.12 x 3.65
Battery Capacity800 milliamp_hours
Battery Voltage3.7 volts

Questions about this item

What are the exact dimensions I need to clear inside my Sony PRS-600 for this 63.52 x 34.12 x 3.65 mm battery?

The pack measures 63.52 mm long, 34.12 mm wide and 3.65 mm thick, so the reader's battery cavity must accommodate those three figures.

Which step do installers most often miss when fitting the replacement cell?

Failing to seat the connector fully onto the motherboard header; the decoder chip will not communicate until the plug clicks home.

After how many full charge cycles will the 800 mAh lithium-ion pack reach its rated 2.96 Wh capacity?

The manufacturer states the cell delivers its best performance after two or three complete charge-and-discharge cycles.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.