We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Cameron Sino Battery for Sonos Controller CB100 CR100 3600mAh 3.7V

SKU CH-PXBF-K46B0

Replacement nickel-zinc battery for Sonos CR100 and CB100 controllers, 3600 mAh at 3.7 V

  • Specifications136.60 x 44.00 x 5.04
  • Typenickel_zinc
  • Battery Pack136.60 x 44.00 x 5.04
  • Battery Typenickel_zinc
  • Battery Capacity3600.00 milliamp_hours
  • Battery Voltage3.70 volts
  • 3600 mAh capacity keeps your Sonos remote running longer
  • 7 V nickel-zinc chemistry matches the original power profile
  • 60 × 44.00 × 5.04 mm form factor fits CB100 and CR100 controllers exactly
  • ISO 9001, RoHS and CE certified for safe, reliable operation
  • Fully decoded chip works like the factory battery from first charge

Direct Replacement for Sonos Controllers

This nickel-zinc battery replaces the original power pack in Sonos Controller CB100 and CR100 units. It matches the 3.70 volt rating and 3600 milliamp hour capacity specified for part numbers CP-CR100 and URC-CB100. The physical dimensions are 136.60 by 44.00 by 5.04 millimetres and the weight is 67.3 grams. Buyers who need a different voltage or a higher capacity will not find it here.

Steady Output Over a Full Day

The 13.3 watt-hour rating supports extended handheld use without the voltage sag seen in short-burst tests. A fully decoded chip communicates with the controller exactly as the factory cell does, so the battery gauge remains accurate throughout the discharge curve. After two or three complete charge and discharge cycles the pack reaches its rated capacity. Users who rely on rapid top-ups between rooms should note the chemistry favours full cycles.

Cool Running With Built-In Protection

Nickel-zinc chemistry runs at low internal resistance, so the pack stays near ambient temperature during normal playback control. Overcharge, over-discharge, over-voltage and short-circuit protection circuits are integrated into the battery assembly. No external charger is required; the controller manages charging through its original dock. Installers who ignore the connector alignment risk damaging the protection board.

Highlights

  • 3600 mAh capacity keeps your Sonos remote running longer
  • 7 V nickel-zinc chemistry matches the original power profile
  • 60 × 44.00 × 5.04 mm form factor fits CB100 and CR100 controllers exactly
  • ISO 9001, RoHS and CE certified for safe, reliable operation
  • Fully decoded chip works like the factory battery from first charge

Specifications

BrandCameron Sino
ModelController CB100, Controller CR100
Part NumberCP-CR100, URC-CB100
Specifications136.60 x 44.00 x 5.04
Typenickel_zinc
Battery Pack136.60 x 44.00 x 5.04
Battery Typenickel_zinc
Battery Capacity3600.00 milliamp_hours
Battery Voltage3.70 volts

Questions about this item

Does the nickel-zinc chemistry run hotter than the original lithium pack during all-day use?

The replacement uses nickel-zinc cells rated at 3.7 V and 3600 mAh, matching the original voltage and capacity so thermal behaviour should be comparable.

What tool or connector do I need before fitting this battery into the controller?

You only need to disconnect the original pack and plug in the new one; the fully decoded chip uses the same connector as the Sonos CP-CR100 and URC-CB100 models.

Will the 136.60 x 44.00 x 5.04 mm dimensions fit the battery compartment of my older CR100 handset?

Yes, those exact dimensions correspond to the Sonos Controller CB100 and CR100, so the pack sits flush in the original cavity.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.