We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular lithium polymer battery pack with black plastic casing and wire connector

Cameron Sino Battery for Sencor SRV 1000/SLV 1000SL 2600mAh 10.8V

SKU CH-HG0W-VP1TP

Replacement lithium-polymer pack delivers 2600mAh at 10.8V for Sencor SRV 1000 and SRV 1000SL vacuums

  • Specifications70.50 x 34.50 x 36.70
  • Typelithium_polymer
  • Battery Pack70.50 x 34.50 x 36.70
  • Battery Typelithium_polymer
  • Battery Capacity2600.00 milliamp_hours
  • Battery Voltage10.80 volts
  • Replaces original Sencor SRV 1000 and SRV 1000SL batteries
  • 2600mAh capacity at 10.8V delivers 28.08Wh runtime
  • 50 x 34.50 x 36.70mm form factor fits original compartment
  • Built-in overcharge, over-discharge and short-circuit protection
  • ISO9001, RoHS and CE certified for safety compliance

Compatible replacement for Sencor SRV 1000

This Cameron Sino battery replaces the original power pack in Sencor SRV 1000 and SRV 1000SL robotic vacuums. It uses a lithium polymer cell rated at 2600mAh and 10.8V. The pack matches the original part numbers including 18650-3S15 and SRX 0014. It is intended for owners of those specific models who need a direct swap.

Limited to devices using the 10.8V 2600mAh form

The battery delivers 28.08Wh at 10.8 volts with dimensions of 70.50 x 34.50 x 36.70mm. It will only operate correctly in vacuums designed for this exact voltage, capacity and physical size. Using it in a device with a different voltage requirement or a larger battery bay will not work. The built-in protection circuit guards against overcharge, over-discharge and short circuits.

Straightforward swap if the connector matches

Installation consists of opening the vacuum's battery compartment, disconnecting the old pack and plugging in the new one using the original connector. A fully decoded chip allows the vacuum to recognise the pack immediately. The most common issue is a loose or misaligned connector that prevents the vacuum from powering on. The manufacturer notes that performance improves after two or three full charge cycles.

Highlights

  • Replaces original Sencor SRV 1000 and SRV 1000SL batteries
  • 2600mAh capacity at 10.8V delivers 28.08Wh runtime
  • 50 x 34.50 x 36.70mm form factor fits original compartment
  • Built-in overcharge, over-discharge and short-circuit protection
  • ISO9001, RoHS and CE certified for safety compliance

Specifications

BrandCameron Sino
ModelSRV 1000, SRV 1000SL
Part Number18650-3S15, 3INR19/66, ML:18650-3815, ML:18650-3S15, SRX 0014
Specifications70.50 x 34.50 x 36.70
Typelithium_polymer
Battery Pack70.50 x 34.50 x 36.70
Battery Typelithium_polymer
Battery Capacity2600.00 milliamp_hours
Battery Voltage10.80 volts

Questions about this item

Should I choose the 2600mAh 10.8V version or a different capacity for my Sencor SRV 1000?

This pack is built to the exact 2600mAh 10.8V specification used in the SRV 1000 and SRV 1000SL; match your original battery part number 18650-3S15 or 3INR19/66 to confirm fit.

What does the 28.08Wh rating mean for daily vacuum run-time?

The 28.08Wh capacity delivers the same energy as the original pack, so run-time per charge matches factory performance once the new cells complete two to three full cycles.

Does the lithium-polymer chemistry change how the 10.8V output behaves under load?

The lithium-polymer cells maintain a steady 10.8V nominal output with built-in overcharge, over-discharge, over-voltage and short-circuit protection, so voltage sag under load stays within original design limits.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.