We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Cameron Sino Battery for Rainin EDP3 Plus 800mAh 3.7V

SKU CH-SZGE-7RJMK

Replacement 800 mAh 3.7 V lithium-ion battery for Rainin EDP3 and EDP3 Plus pipettes

  • Direct replacement for Rainin EDP3 Plus pipettes
  • 800 mAh capacity delivers 2.96 Wh runtime
  • 7 V lithium-ion cell matches original voltage
  • Compact 48.50 × 30.00 × 8.00 mm form factor
  • Built-in protection against overcharge and short circuit

Replacement battery for Rainin pipettes

The Cameron Sino unit replaces the original 6107-040 cell in Rainin EDP3, EDP3 Plus and 20-200 µL pipettes. It delivers 800 mAh at 3.7 V for 2.96 Wh of capacity. Medical and laboratory staff who need a direct swap for a depleted pack will find the correct fit here. Buyers who need a different voltage or a larger capacity cannot use this model.

Installation notes and common issues

The pack measures 48.50 x 30.00 x 8.00 mm and weighs 18.0 g, matching the factory dimensions. A fully decoded chip communicates with the pipette electronics without extra steps. Most problems arise when the connector is not fully seated or when a low-quality charger is used. The supplier advises two or three full charge-discharge cycles before judging runtime.

Limits of the single-cell 3.7 V format

A single lithium-ion cell at 3.7 V caps the energy at 2.96 Wh, so runtime is fixed by that chemistry. The protection circuit prevents over-charge, over-discharge and short circuits but cannot extend the fundamental capacity. Storage above 60 °C (140 °F) accelerates ageing and is not covered by the cell's safety margins. Users needing longer shifts must carry a spare pack.

Highlights

  • Direct replacement for Rainin EDP3 Plus pipettes
  • 800 mAh capacity delivers 2.96 Wh runtime
  • 7 V lithium-ion cell matches original voltage
  • Compact 48.50 × 30.00 × 8.00 mm form factor
  • Built-in protection against overcharge and short circuit

Specifications

BrandCameron Sino
ModelEDP3, EDP3 Plus, EDP3 Plus pipettes, Pipette 20-200uL, Pipette EDP3

Questions about this item

How can I verify the 3.7 V 800 mAh battery is working correctly after installing it in my Rainin EDP3 Plus?

After fitting the battery, run two or three full charge and discharge cycles; the pipette should hold its calibrated volume across the 20–200 µL range without unexpected shutdowns.

What is included in the package and what must I source separately for the Cameron Sino replacement?

The box contains one 800 mAh 3.7 V cell with a pre-fitted decoded chip and protective foam; you only need your existing Rainin charger and the pipette itself.

My device shows part number 6107-040 — which capacity version of this battery should I select?

Choose the single 800 mAh / 2.96 Wh version listed; it matches the original Rainin 6107-040 specifications exactly.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.