We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular lithium-ion battery pack, grey plastic casing, gold contacts, 55 by 34 by 5.5 mm

Cameron Sino Battery for Polycom PWM-10T QDX-6000 1100mAh 3.7V

SKU CH-GMCB-WJ0RF

Replacement lithium-ion battery for Polycom PWM-10T, QDX-6000 and Wireless Soundstation PWM-10, 1100 mAh at 3.7 V with built-in protection circuits

  • Specifications55.00 x 34.00 x 5.50
  • Battery Pack55.00 x 34.00 x 5.50
  • Battery Capacity1100 milliamp_hours
  • Battery Voltage3.7 volts
  • 1100 mAh capacity keeps the SoundStation running longer
  • 7 V lithium-ion cell matches the original voltage exactly
  • 55 x 34 x 5.5 mm form factor fits PWM-10T and QDX-6000 without modification
  • ISO 9001, RoHS and CE certified for safety and quality
  • Built-in protection guards against over-charge, over-discharge and short circuits

Direct replacement for Polycom conference phones

This Cameron Sino battery replaces the original 2200-32400-001 cell in Polycom PWM-10T, QDX-6000 and Wireless Soundstation PWM-10 speaker units. It supplies 3.7 volts and 1100 milliamp-hours in a 55.00 by 34.00 by 5.50 millimetre lithium-ion pack that weighs 21.9 grams. The integrated protection circuit guards against over-charge, over-discharge, over-voltage and short circuits.

Upgrade when the original cell no longer holds

Swap this battery in when the factory pack drops below usable run-time or shows swelling. The fully decoded chip communicates with the speaker exactly like the original, so no firmware workarounds are required. Installation is straightforward; many users follow publicly available videos and complete the change in minutes without special tools.

Fits inside the existing speaker cavity

The pack occupies the same footprint as the OEM unit, leaving all other hardware untouched. No extra cabling, adapters or chassis modifications are needed. Once seated, the battery restores wireless operation for conference calls and audio playback, freeing the device from permanent mains connection.

Highlights

  • 1100 mAh capacity keeps the SoundStation running longer
  • 7 V lithium-ion cell matches the original voltage exactly
  • 55 x 34 x 5.5 mm form factor fits PWM-10T and QDX-6000 without modification
  • ISO 9001, RoHS and CE certified for safety and quality
  • Built-in protection guards against over-charge, over-discharge and short circuits

Specifications

BrandCameron Sino
ModelBattery For Polycom
Part Number2200-32400-001
Specifications55.00 x 34.00 x 5.50
Battery Pack55.00 x 34.00 x 5.50
Battery Capacity1100 milliamp_hours
Battery Voltage3.7 volts

Questions about this item

What are the exact dimensions of the 55.00 x 34.00 x 5.50 mm battery for the Polycom PWM-10T?

The replacement cell measures 55.00 mm long, 34.00 mm wide and 5.50 mm thick, matching the original Polycom 2200-32400-001 pack.

Which connector orientation must be aligned when fitting the 3.7 V 1100 mAh pack into the QDX-6000?

Insert the pack so the multi-pin connector seats fully into the socket; a partial connection prevents charging and is the most common install error.

After how many charge cycles does the lithium-ion 4.07 Wh cell reach full capacity?

The manufacturer states the battery achieves its best performance after 2 or 3 complete charge and discharge cycles.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.