Peerless Industrial Group
Peerless Industrial Group Tire Chains Single Bus & RV V-Bar PK2 QG2821
$67.99
0.00081805BTC
In stock
Cameron Sino Battery for Nikon Nivo 1C/2C/2M/3C/3M/5C/5M/C/M & NPL322/322+ 6400mAh 3.7V
Replacement battery for Nikon Nivo and NPL survey instruments, 6400 mAh at 3.7 V with built-in protection circuits
- Replacement battery fits Nikon Nivo 1C, 2C, 2M, 3C, 3M, 5C, 5M, C, M and NPL322 series
- 6400mAh capacity delivers 23.68Wh at 3.7V for extended field operation
- Fully decoded chip works identically to the original battery for reliable communication
- ISO9001, RoHS and CE certified with overcharge, over-discharge, over-voltage and short-circuit protection
- Compact 67.90 x 39.50 x 25.60mm design weighs 105.0g for easy transport
Replacement battery for Nikon Nivo total stations
This Cameron Sino battery replaces the original power pack for Nikon Nivo 1C, 2C, 2M, 3C, 3M, 5C, 5M, C, M and NPL322 series instruments. It delivers 6400mAh at 3.7V and fits survey and test equipment that uses part numbers 108571-00, 53708-00, 53708-PRN, 890-0084, 890-0084-XXQ or 993251-MY. The pack is certified to ISO9001, RoHS and CE standards.
Straightforward swap with a decoded chip
The fully decoded chip communicates with the instrument exactly like the factory cell, so the swap is a simple case of unplugging the old pack and connecting the new one. Installation videos are widely available online for reference. The main risk is a loose connector; if the plug is not seated firmly the unit will not power on. The pack includes overcharge, over-discharge, over-voltage and short-circuit protection for safe operation.
Verify model and part number before ordering
Check the model label on your total station and the part number printed on your existing battery against the compatibility list above. A mismatch means the pack will not fit or communicate correctly. The battery measures 67.90 x 39.50 x 25.60mm and weighs 105.0g, so confirm the compartment can accept those dimensions. Do not use low-quality third-party chargers, and allow two to three full charge cycles for the cell to reach full capacity.
Highlights
- Replacement battery fits Nikon Nivo 1C, 2C, 2M, 3C, 3M, 5C, 5M, C, M and NPL322 series
- 6400mAh capacity delivers 23.68Wh at 3.7V for extended field operation
- Fully decoded chip works identically to the original battery for reliable communication
- ISO9001, RoHS and CE certified with overcharge, over-discharge, over-voltage and short-circuit protection
- Compact 67.90 x 39.50 x 25.60mm design weighs 105.0g for easy transport
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | Nivo 1C, Nivo 2C, Nivo 2M, Nivo 3C, Nivo 3M, Nivo 5C, Nivo 5M, Nivo C, Nivo C Total Station, Nivo M, Nivo M Total Station, NPL322, NPL-322, NPL322+, NPL-322+ |
Questions about this item
How do I confirm the battery is working correctly after installing it in my Nikon Nivo?
The fully decoded chip should report the correct 3.7 V and 6400 mAh capacity on the instrument display, and the total station should power up and hold charge through a full field session.
What comes in the box and do I need any extra parts to fit this battery?
The package includes the 105.0 g battery with shock-absorbing foam; no separate connector or charger is required because the unit uses the original Nikon charging system.
Which Cameron Sino model matches my Nikon NPL-322+ total station?
This single SKU replaces all listed part numbers — 108571-00, 53708-00, 53708-PRN, 890-0084, 890-0084-XXQ and 993251-MY — so it fits every Nivo and NPL-322 variant shown.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
