Cameron Sino Battery for Neeo Control 4 NE-RMT 1200mAh 4.44Wh
Replacement lithium-polymer battery for Neeo Control 4 and NE-RMT remotes, 1200 mAh at 3.7 V with built-in protection circuits
- Typelithium_polymer
- Capacity (mAh)1200mAh / 4.44Wh
- Replacement battery fits Neeo Control 4 NE-RMT
- 1200mAh capacity delivers 4.44Wh of energy
- 7V lithium-polymer cell matches original voltage
- Slim 68.20 x 39.50 x 4.00mm profile fits device
- Built-in protection guards against overcharge and short circuit
Replacement Battery for Neeo Control 4 NE-RMT
This lithium-polymer cell replaces the original battery in the Neeo Control 4 NE-RMT remote. It delivers 1200mAh capacity at 3.7V and weighs 22.0g. The pack measures 68.20 x 39.50 x 4.00mm and carries ISO9001, RoHS and CE certification.
Sustained Use Behaviour
The fully decoded chip communicates with the remote exactly like the factory unit, so charge reporting stays accurate over many cycles. Built-in protection guards against overcharge, over-discharge, over-voltage and short circuits during long sessions. Performance stabilises after two or three full charge and discharge cycles.
Compatibility Check Before Ordering
Verify that your remote carries the NE-RMT model designation and that the original battery part number is AHB404066. Confirm the connector layout matches the replacement before fitting. Avoid low-quality third-party chargers to preserve cell health.
Highlights
- Replacement battery fits Neeo Control 4 NE-RMT
- 1200mAh capacity delivers 4.44Wh of energy
- 7V lithium-polymer cell matches original voltage
- Slim 68.20 x 39.50 x 4.00mm profile fits device
- Built-in protection guards against overcharge and short circuit
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | Control 4, NE-RMT |
| Type | lithium_polymer |
| Capacity (mAh) | 1200mAh / 4.44Wh |
Questions about this item
Does the 3.7 V lithium-polymer cell generate noticeable heat during a full day of use?
The 3.7 V 1200 mAh lithium-polymer cell runs at low current draw in the Neeo Control 4 NE-RMT remote, so it stays cool during all-day operation.
What must I already own to install this replacement battery?
You need a Neeo Control 4 NE-RMT remote with part number AHB404066 and a small screwdriver to open the battery compartment.
Will the 68.20 × 39.50 × 4.00 mm pack fit the original NE-RMT housing without modification?
Yes, the dimensions match the original battery exactly, so it seats in the existing compartment without any alteration.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



