Cameron Sino Battery for iRobot Roomba 5200mAh
A 5200 mAh replacement battery compatible with Roomba e, i, and J series models
- Capacity (mAh)5200mAh / 74.88Wh
- 5200mAh capacity extends cleaning sessions between charges
- 4V 74.88Wh rating matches original Roomba power specifications
- Fully decoded chip communicates with robot like factory battery
- Compatible with Roomba i3, i4, i7, i8, J7, e5 and e6 series
- Compact 139.16 x 51.38 x 50.50mm design fits original battery bay
Replacement battery for iRobot Roomba models
This 5200mAh lithium-ion pack replaces the original battery in Roomba i3, i4, i7, i7+, i8, i8+, J7, e5 and e6 series vacuums. It matches the 14.4V specification and fits the same 139.16 x 51.38 x 50.50mm compartment. A fully decoded chip communicates with the robot exactly as the factory unit does.
Capacity and runtime headroom
The 74.88Wh rating delivers extended cleaning cycles on hard floors and low-pile carpet before the dock is needed. High-pile carpet, frequent edge cleaning or large multi-room layouts will drain the pack faster and may require a mid-run recharge. It is not suited for users who need continuous whole-house coverage without interruption.
Thermals, noise and power draw
The battery operates at the standard 14.4V and adds 425.0g to the robot's weight. No active cooling or fan is present, so the pack runs silently and contributes no audible noise. Normal charging current stays within the robot's built-in limits, and the casing is rated for storage up to 60°C.
Highlights
- 5200mAh capacity extends cleaning sessions between charges
- 4V 74.88Wh rating matches original Roomba power specifications
- Fully decoded chip communicates with robot like factory battery
- Compatible with Roomba i3, i4, i7, i8, J7, e5 and e6 series
- Compact 139.16 x 51.38 x 50.50mm design fits original battery bay
Specifications
| Brand | CS Cameron Sino |
|---|---|
| Model | Battery For iRobot |
| Capacity (mAh) | 5200mAh / 74.88Wh |
Questions about this item
Will this 5200mAh 14.4V battery fit my Roomba e5154 and i7550 without any adapter?
The battery is listed as compatible with Roomba e5154 and Roomba i7550, plus many other e5, e6, i3, i4, i7, i8 and J7 models, so it replaces the original pack directly.
How can I confirm the new battery is working correctly after I install it?
After installation, run the Roomba through two or three full charge and discharge cycles; the built-in decoded chip communicates with the robot so the app shows normal capacity and runtime.
What comes in the box and do I need to buy a separate charger?
The package contains the 5200mAh 14.4V replacement battery weighing 425.0g with dimensions 139.16 x 51.38 x 50.50mm; the robot’s own dock charges it, so no extra charger is required.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
BatteryJack inc. PowerStar Portalac GS PE6V1.2 6V 1.2Ah dry cell battery
BatteryJack inc. EnerSys Hawker Cyclon 0809-0012 6V 5.0Ah dry cell battery
- Batteries
- 1-pack



