Sony
Sony Alpha a6400 compact mirrorless camera black with 16-50mm and 55-210mm lenses 32GB
$830.99
0.00994007BTC
In stock
Cameron Sino Battery for Innomed Cardio Aid 200B 3000mAh 12V
Replacement lithium-ion battery for Innomed Cardio Aid 200B delivering 3000mAh at 12 volts
- Specifications100.90 x 76.20 x 69.20
- Battery Pack100.90 x 76.20 x 69.20
- Battery Capacity3000 milliamp_hours
- Battery Voltage12 volts
- Replacement for Innomed Cardio Aid 200B medical devices
- 3000mAh capacity at 12.0 volts delivers 36.00Wh energy
- Dimensions 100.90 x 76.20 x 69.20 mm fit original compartment
- ISO9001 RoHS CE certified with overcharge over-discharge over-voltage short-circuit protection
- New fully decoded chip works like the original battery
Replacement Battery for Innomed Cardio Aid 200B
This 12 V lithium-ion pack replaces the original Innomed 110460-U and R-2003-1 cells in the Cardio Aid 200B medical device. It delivers 3000 mAh capacity and 36.00 Wh energy in a 100.90 x 76.20 x 69.20 mm form factor. The integrated protection circuit guards against overcharge, over-discharge, over-voltage and short circuit. A fully decoded chip ensures communication with the host equipment matches the factory battery.
Sustained Load Behaviour
The cell chemistry supports continuous discharge at the rated 12.0 V without the voltage sag seen in short-burst tests. Internal protection limits current if the load exceeds safe thresholds, preventing thermal stress during extended monitoring sessions. After two or three full charge-discharge cycles the pack reaches its stable capacity window and maintains consistent runtime across shifts.
Practical Limits of the Standard Interface
The proprietary connector mates only with the Cardio Aid 200B power rail; it cannot be adapted to other Innomed models or generic 12 V inputs. Mechanical dimensions of 100.90 x 76.20 x 69.20 mm fix the battery bay size, so the unit will not fit devices with smaller compartments. Storage above 60 °C (140 °F) accelerates permanent capacity loss and voids the safety certifications.
Highlights
- Replacement for Innomed Cardio Aid 200B medical devices
- 3000mAh capacity at 12.0 volts delivers 36.00Wh energy
- Dimensions 100.90 x 76.20 x 69.20 mm fit original compartment
- ISO9001 RoHS CE certified with overcharge over-discharge over-voltage short-circuit protection
- New fully decoded chip works like the original battery
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | Cardio Aid 200, Cardio Aid 200B |
| Part Number | 110460-U, R-2003-1, R-2003-2 |
| Specifications | 100.90 x 76.20 x 69.20 |
| Battery Pack | 100.90 x 76.20 x 69.20 |
| Battery Capacity | 3000 milliamp_hours |
| Battery Voltage | 12 volts |
Questions about this item
How much heat does the 12 V 3000 mAh pack generate during continuous use in the Cardio Aid 200B?
The lithium-ion chemistry and built-in protection circuit keep temperatures within safe limits for medical devices; no active cooling is required.
What must the buyer already own to install this replacement battery?
You need the Innomed Cardio Aid 200 or 200B unit itself and basic hand tools to open the battery compartment and seat the connector.
Will the decoded chip in this pack work with firmware on older Cardio Aid 200 units?
Yes, the fully decoded chip communicates identically to the original 110460-U or R-2003-1 cells, so legacy firmware recognises it without updates.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
