Cameron Sino Battery for IKUSI 2000mAh 4.8V
Replacement 2000mAh 4.8V battery for IKUSI crane remote controls, 114.90 x 47.20 x 20.00mm
- Direct replacement for IKUSI crane remotes
- 2000 mAh capacity at 4.8 V for long run time
- ISO9001, RoHS and CE certified for safety
- 0 g pack with built-in protection circuits
- Fully decoded chip works like the original
Compatible crane remote models
This Cameron Sino battery replaces the original power source for IKUSI BERLINDE, GH, IK3 and IK4 transmitters, as well as IKONTROL, JASO, KONECRANES T70 and TM70 series consoles. It matches the 4.8 V, 2000 mAh specification and the 2305271 or BT24IK part numbers used across those units.
Certified protection and packaging
The cell carries ISO9001, RoHS and CE certification and includes overcharge, over-discharge, over-voltage and short-circuit protection circuits. A fully decoded chip ensures the same communication with the handset as the factory pack, and the box ships with shock-absorbing foam for transit safety.
Dimensions and daily handling
The pack measures 114.90 x 47.20 x 20.00 mm and weighs 137.0 g, fitting the existing battery compartment without modification. Installation videos are widely available online, and the connector plugs directly into the remote. Buyers needing a different voltage or capacity should verify their original part number before ordering.
Highlights
- Direct replacement for IKUSI crane remotes
- 2000 mAh capacity at 4.8 V for long run time
- ISO9001, RoHS and CE certified for safety
- 0 g pack with built-in protection circuits
- Fully decoded chip works like the original
Specifications
| Brand | CS Cameron Sino |
|---|---|
| Model | Battery For IKUSI |
Questions about this item
How many charge cycles before the 2000mAh capacity drops noticeably?
The battery reaches its best performance after 2 or 3 complete charge and discharge cycles, then continues with overcharge, over-discharge, over-voltage and short-circuit protection built in.
What is the first limit reached during continuous crane-remote operation?
The 4.8 V, 2000 mAh (9.60 Wh) cell will hit its capacity limit first; sustained draw will exhaust the stored energy before any voltage or thermal threshold is reached.
How hot does the pack get when the transmitter runs all day?
The manufacturer cautions against storing the battery above 60 °C (140 °F); normal all-day use in the handset stays well below that temperature.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
DURACELL MN2400B4Z AAA alkaline dry cell battery 4-pack 1.5V
- Batteries
- 4-pack
Suppower AAA Alkaline Dry Cell Battery 24-pack EN92
- 24-pack
- AAA Alkaline



