Sony
Sony Alpha a6400 compact mirrorless camera black with 16-50mm and 55-210mm lenses 32GB
$830.99
0.00990819BTC
In stock
Cameron Sino Battery for Hitachi X-MET8000 6200mAh 7.2V
Replacement lithium-polymer battery for Hitachi X-MET8000 analysers, 6200 mAh at 7.2 V with ISO 9001, RoHS and CE certification
- Typelithium_polymer
- Battery Typelithium_polymer
- Battery Capacity6200 milliamp_hours
- Battery Voltage7.2 volts
- Replacement for Hitachi X-MET8000 XRF analysers
- 6200 mAh lithium-polymer cell delivers 44.64 Wh
- 2 V nominal voltage matches original spec
- Built-in protection against over-charge, over-discharge and short circuit
- New condition with ISO 9001, RoHS and CE certification
Compatible X-MET8000 replacement battery
This lithium-polymer pack replaces the original power source for Hitachi X-MET8000 analysers including the experte, optimal, Optimum Geo, schlau and XRF Alloys models. It matches the OEM part numbers ND2037FD31, ND2037HD29, ND2037HD34 and ND2037QE34. The cell delivers 6200mAh at 7.2 volts for field and lab use.
Installation notes and common issues
The pack is fully decoded so it communicates with the analyser exactly like the factory unit. Alignment of the connector is the only critical step; forcing it can bend pins and prevent charging. A new cell reaches full capacity after two or three complete charge-discharge cycles. Using an unapproved charger can shorten service life.
Practical limits of the 7.2 V lithium-polymer
The chemistry provides 44.64 watt-hours in a single-cell format, which caps runtime for high-draw XRF measurements. Voltage drops under heavy load, so extended analysis sessions may require a spare pack. The battery is not a power-bank and cannot charge other devices. Indoor and outdoor operation is supported within normal temperature ranges.
Highlights
- Replacement for Hitachi X-MET8000 XRF analysers
- 6200 mAh lithium-polymer cell delivers 44.64 Wh
- 2 V nominal voltage matches original spec
- Built-in protection against over-charge, over-discharge and short circuit
- New condition with ISO 9001, RoHS and CE certification
Specifications
| Brand | cameron sino |
|---|---|
| Model | HITACHI X-MET8000 schlau X-MET8000 optimal X-MET8000 Optimum Geo analyser X-MET8000 experte X-MET8000 XRF Alloys Analyzer Thermo Scientific Niton DXL Analyzer |
| Part Number | HITACHI ND2037FD31 Thermo Scientific ND2037HD29 ND2037HD34 ND2037QE34 |
| Type | lithium_polymer |
| Battery Type | lithium_polymer |
| Battery Capacity | 6200 milliamp_hours |
| Battery Voltage | 7.2 volts |
Questions about this item
How can I confirm the 6200mAh 7.2V battery is working correctly after installing it in my X-MET8000 analyser?
After fitting the battery, run the device through two or three full charge and discharge cycles; the analyser should then report the full 44.64Wh capacity and hold charge during normal XRF use.
What comes in the box and is anything else required to use the battery with my X-MET8000?
The package contains one lithium-polymer battery with a pre-fitted protection circuit and shock-absorbing foam; no extra cables or chargers are included, so you must use the analyser’s original charger.
Which part number should I match to be sure this 6200mAh pack fits my specific X-MET8000 model?
Check that your original battery carries part number ND2037FD31, ND2037HD29, ND2037HD34 or ND2037QE34; this replacement is built to those exact specifications.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
