Sony
Sony Alpha a6400 compact mirrorless camera black with 16-50mm and 55-210mm lenses 32GB
$830.99
0.00997563BTC
In stock
Cameron Sino Battery for GE Datex-Ohmeda S/5 3800mAh 12V
Replacement battery for GE Datex-Ohmeda S/5 patient monitors, 3800mAh at 12V with built-in protection circuits
- Specifications133.50 x 84.50 x 19.00
- Battery Pack133.50 x 84.50 x 19.00
- Battery Capacity3800.00 milliamp_hours
- Battery Voltage12 volts
- Direct replacement for GE Datex-Ohmeda S/5 patient monitors
- 3800 mAh capacity delivers 45.60 Wh of runtime
- 0 V output matches original equipment specifications
- Compact 133.50 x 84.50 x 19.00 mm form factor fits the battery bay
- Built-in protection against overcharge, over-discharge and short circuit
Compatible Patient Monitor Battery
This Cameron Sino replacement battery fits GE Datex-Ohmeda S/5, S/5 PATIENT MONIT, S/5CAM, S5 and S5CAM patient monitors. It delivers 3800mAh capacity at 12 volts and matches the original 133.50 x 84.50 x 19.00 mm form factor. The pack includes a fully decoded chip that communicates with the host device exactly like the factory unit.
Verify Model And Part Number Before Ordering
Confirm your monitor displays one of the listed model names and that the original battery carries part number 17014, 10HR4/3AU, 17014-HEL, AMED2002, B11221 or OM11221. Cross-referencing both identifiers prevents fitment issues caused by similar-looking but electrically different packs. The supplier advises two or three full charge and discharge cycles before the cell reaches rated performance.
Drop-In Power For Critical Monitoring
The battery slides into the monitor’s dedicated compartment and connects through the existing connector without adapters or soldering. Built-in overcharge, over-discharge, over-voltage and short-circuit protection safeguards both the cell and the host equipment during continuous operation. Shock-absorbing foam in the packaging protects the unit during transit so it arrives ready for immediate installation.
Highlights
- Direct replacement for GE Datex-Ohmeda S/5 patient monitors
- 3800 mAh capacity delivers 45.60 Wh of runtime
- 0 V output matches original equipment specifications
- Compact 133.50 x 84.50 x 19.00 mm form factor fits the battery bay
- Built-in protection against overcharge, over-discharge and short circuit
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | S/5 Patient Monitor |
| Part Number | 17014, 5010, B11221 |
| Specifications | 133.50 x 84.50 x 19.00 |
| Battery Pack | 133.50 x 84.50 x 19.00 |
| Battery Capacity | 3800.00 milliamp_hours |
| Battery Voltage | 12 volts |
Questions about this item
What is included in the box and does the GE Datex-Ohmeda S/5 patient monitor require any separate purchase to use this battery?
The package contains the Cameron Sino 3800mAh 12V replacement battery with shock-proof foam for transport protection. No separate components are needed; the battery is a direct replacement for part numbers 17014, 5010 and B11221.
Which of the listed part numbers should I match to confirm this 3800mAh 12V battery fits my GE Datex-Ohmeda S/5 monitor?
Check the original battery for part numbers 10HR4/3AU, 17014, 17014-HEL, AMED2002, B11221 or OM11221. If any of those appear, this 133.50 x 84.50 x 19.00mm pack is the correct replacement.
What does the 3800mAh 12V rating mean for actual runtime in a GE Datex-Ohmeda S/5 patient monitor?
The 3800mAh capacity at 12.0 volts delivers 45.60Wh of energy. Runtime depends on the monitor's power draw; a new battery reaches optimal performance after two or three full charge and discharge cycles.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
