Sony
Sony Alpha a6400 compact mirrorless camera black with 16-50mm and 55-210mm lenses 32GB
$830.99
0.00996558BTC
In stock
Cameron Sino Battery for Fluke E1515W 1996446 1800mAh 4.8V
Replacement rechargeable pack for Fluke E1515W test equipment, 1800mAh at 4.8V
- Specifications81.00 x 60.00 x 20.30
- Battery Pack81.00 x 60.00 x 20.30
- Battery Capacity1800 milliamp_hours
- Battery Voltage4.8 volts
- Compatible with Fluke E1515W part 1996446
- 1800 mAh capacity delivers 8.64 Wh runtime
- 8 V output matches original specification
- ISO9001 RoHS CE certified for safety
- Overcharge over-discharge short-circuit protection built in
Cameron Sino Battery for Fluke E1515W
This replacement battery is built for the Fluke E1515W test instrument and matches the original 1996446 part number. It supplies 4.8 volts and 1800 milliamp hours capacity for portable survey and measurement work. The pack is certified to ISO9001, RoHS and CE standards.
Suitable for technicians replacing the original pack
Users who need a different voltage, a higher capacity or a battery for another Fluke model should look elsewhere. This unit fits only the specified equipment and will not power devices that require alternative specifications.
1800 mAh capacity at 4.8 V
The 8.64 Wh rating determines runtime for the E1515W. Verify your device requires exactly this voltage and capacity before purchase, as mismatched specifications will prevent correct operation.
Highlights
- Compatible with Fluke E1515W part 1996446
- 1800 mAh capacity delivers 8.64 Wh runtime
- 8 V output matches original specification
- ISO9001 RoHS CE certified for safety
- Overcharge over-discharge short-circuit protection built in
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | E1515W |
| Part Number | 1996446 |
| Specifications | 81.00 x 60.00 x 20.30 |
| Battery Pack | 81.00 x 60.00 x 20.30 |
| Battery Capacity | 1800 milliamp_hours |
| Battery Voltage | 4.8 volts |
Questions about this item
What are the exact dimensions of this 81.00 x 60.00 x 20.30 mm battery pack for the Fluke E1515W?
The replacement pack measures 81.00 mm long, 60.00 mm wide and 20.30 mm thick, matching the original Fluke 1996446 form factor.
Which connector orientation on the 4.8 V, 1800 mAh pack is the step installers most often reverse?
The polarised plug must mate with the Fluke E1515W socket so the red wire aligns with the positive terminal; reversing it prevents the device from powering on.
After how many charge cycles should the 8.64 Wh pack be replaced to maintain reliable survey operation?
Replace the pack when run-time drops below roughly 80 % of the original 1800 mAh capacity, which typically occurs after several hundred full cycles.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
