Sony
Sony Alpha a6400 compact mirrorless camera black with 16-50mm and 55-210mm lenses 32GB
$830.99
0.00993033BTC
In stock
Cameron Sino Battery for Flir One, One 2st SDL352054 185mAh 0.68Wh
Replacement lithium-polymer cell for Flir One and One 2st thermal cameras, 185 mAh, 3.7 V, 54.00 × 20.54 × 3.60 mm
- Typelithium_polymer
- Pack54.00 x 20.54 x 3.60
- Chemicallithium_polymer
- Capacity185mAh / 0.68Wh
- Compatible with Flir One and One 2st thermal cameras
- 185 mAh capacity delivers 0.68 Wh of power
- Lithium-polymer cell weighs only 6.0 g
- Built-in protection against overcharge, over-discharge and short circuit
- Fully decoded chip works like the original battery
Compatible Thermal Camera Battery
This replacement battery fits the Flir One and One 2st thermal cameras. It uses a lithium-polymer cell rated at 185mAh and 0.68Wh with a nominal voltage of 3.7V. The fully decoded chip is designed to work like the original pack.
Slim Pack Build And Protection
The pack measures 54.00 x 20.54 x 3.60mm and weighs 6.0g, matching the original form factor for a direct fit. It includes overcharge, over-discharge, over-voltage and short-circuit protection circuits. The unit ships in shock-absorbing foam for transit safety.
Verify Model And Connector Before Order
Confirm your camera shows the part number SDL352054 on the original battery to ensure compatibility. Check that the connector on your existing pack matches the replacement before installation. A new cell reaches full performance after two or three complete charge cycles.
Highlights
- Compatible with Flir One and One 2st thermal cameras
- 185 mAh capacity delivers 0.68 Wh of power
- Lithium-polymer cell weighs only 6.0 g
- Built-in protection against overcharge, over-discharge and short circuit
- Fully decoded chip works like the original battery
Specifications
| Brand | Cameron Sino |
|---|---|
| Model | One, One 2st |
| Part Number | SDL352054 |
| Type | lithium_polymer |
| Pack | 54.00 x 20.54 x 3.60 |
| Chemical | lithium_polymer |
| Capacity | 185mAh / 0.68Wh |
Questions about this item
What is the 3.7 V lithium-polymer cell's capacity and energy rating?
The cell is rated at 185 mAh and 0.68 Wh, matching the original Flir SDL352054 specification.
Will the 54.00 x 20.54 x 3.60 mm pack fit the Flir One and One 2st thermal cameras?
Yes, those exact dimensions are listed for the SDL352054 replacement, so it seats in the same battery compartment.
How is the battery installed and what common step should be avoided?
Align the connector with the camera's socket and press until it clicks; the step users miss is fully seating the connector before closing the cover.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
