We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular lithium-polymer battery, matte finish, 111.50 x 82.20 x 8.10 mm

Cameron Sino Battery for Creator ST-7600C PT508080 5000mAh 7.4V

SKU CH-9J5G-D159Z

A 5000 mAh lithium-polymer replacement battery delivering 7.4 V for Creator ST-7600 and ST-7600C wireless touch-screen devices

  • Specifications111.50 x 82.20 x 8.10
  • Typelithium_polymer
  • Battery Pack111.50 x 82.20 x 8.10
  • Battery Typelithium_polymer
  • Battery Capacity5000.00 milliamp_hours
  • Battery Voltage7.40 volts
  • Replacement for Creator ST-7600 and ST-7600C wireless touch screens
  • 5000 mAh capacity delivers 37.0 Wh of energy at 7.4 V
  • Lithium-polymer chemistry in a 111.50 x 82.20 x 8.10 mm pack weighing 171.0 g
  • Built-in protection against overcharge, over-discharge, over-voltage and short circuit
  • ISO 9001, RoHS and CE certified with fully decoded chip for original-like operation

Direct Replacement for Creator ST-7600C

This lithium-polymer battery matches the original 5000mAh capacity and 7.4V voltage for the Creator ST-7600 and ST-7600C wireless touch-screen devices. It uses the PT508080 part number and fits the 111.50 x 82.20 x 8.10mm form factor. The fully decoded chip communicates with the host exactly like the factory pack. ISO9001, RoHS and CE certifications are included.

Steady Output Through a Full Day

The 37.0Wh rating delivers consistent voltage across extended recording or monitoring sessions without the sharp drop-off seen in aged cells. Over-charge, over-discharge, over-voltage and short-circuit protection circuits maintain stable performance under continuous load. A fresh pack reaches peak capacity after two or three complete charge cycles.

Upgrade from a Depleted Original Pack

Owners of the ST-7600 or ST-7600C whose runtime has fallen below usable levels can restore factory endurance with this single-cell replacement. The jump is worth it when the original battery no longer holds enough charge for a full shift or when the device shuts down prematurely. No soldering or firmware changes are required.

Highlights

  • Replacement for Creator ST-7600 and ST-7600C wireless touch screens
  • 5000 mAh capacity delivers 37.0 Wh of energy at 7.4 V
  • Lithium-polymer chemistry in a 111.50 x 82.20 x 8.10 mm pack weighing 171.0 g
  • Built-in protection against overcharge, over-discharge, over-voltage and short circuit
  • ISO 9001, RoHS and CE certified with fully decoded chip for original-like operation

Specifications

Brandcameron sino
ModelCreator ST-7600C Wireless Touch Screen ST-7600
Part NumberCreator PT508080
Specifications111.50 x 82.20 x 8.10
Typelithium_polymer
Battery Pack111.50 x 82.20 x 8.10
Battery Typelithium_polymer
Battery Capacity5000.00 milliamp_hours
Battery Voltage7.40 volts

Questions about this item

How much heat does the 7.4 V lithium-polymer cell generate during all-day use?

The pack is rated at 37.0 Wh and 5000 mAh; normal operation produces only warm temperatures, not excessive heat.

What must I already own to install this PT508080 replacement?

You need the Creator ST-7600 or ST-7600C wireless touch-screen device and a compatible charger for the 7.4 V lithium-polymer battery.

Will this 111.50 × 82.20 × 8.10 mm battery fit my original ST-7600C without modification?

Yes, it matches the exact dimensions and connector of the original Creator PT508080 cell for a direct swap.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.