We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular rechargeable battery, dark grey plastic casing, gold contact strip, 58.14 by 37.60 by 28.70 mm

Cameron Sino Battery for CipherLAB CP60, CP60G 4400mAh 16.28Wh

SKU CH-XKF0-KDW4Q

Rechargeable 3.7 V 4400 mAh 16.28 Wh replacement battery fits CipherLAB CP60 and CP60G barcode scanners

  • Specifications58.14 x 37.60 x 28.70
  • Battery Pack58.14 x 37.60 x 28.70
  • Battery Capacity4400mAh / 16.28Wh
  • Battery Voltage3.7 volts
  • 4400mAh capacity powers CipherLAB CP60 and CP60G scanners through long shifts
  • 7V 16.28Wh lithium cell matches original voltage and energy specs
  • 14 × 37.60 × 28.70mm form factor fits the battery bay exactly
  • Built-in protection guards against overcharge, over-discharge and short circuits
  • ISO9001, RoHS and CE certified for safety and quality compliance

Direct replacement for CipherLAB CP60 scanners

This Cameron Sino battery matches the original BA-0064A4 and BCP60ACC part numbers for the CP60 and CP60G barcode scanners. It delivers 4400mAh capacity at 3.7 volts in a 58.14 x 37.60 x 28.70 mm pack weighing 98.5 g. The rechargeable cell is certified to ISO9001, RoHS and CE standards.

Swaps out a depleted original pack

When the factory battery no longer holds a full shift of charge, this unit restores the scanner to its original runtime of 16.28 Wh. The jump is worth it if the device shuts down early or requires frequent top-ups during a workday. A new cell reaches peak performance after two or three complete charge cycles.

Fits the existing battery bay without modification

The pack uses the same connector and physical footprint as the OEM unit, so it slides into the CP60 or CP60G housing and locks in place. No extra cabling, adapters or firmware updates are needed. The built-in protection circuit guards against overcharge, over-discharge, over-voltage and short circuits, preserving both the battery and the scanner.

Highlights

  • 4400mAh capacity powers CipherLAB CP60 and CP60G scanners through long shifts
  • 7V 16.28Wh lithium cell matches original voltage and energy specs
  • 14 × 37.60 × 28.70mm form factor fits the battery bay exactly
  • Built-in protection guards against overcharge, over-discharge and short circuits
  • ISO9001, RoHS and CE certified for safety and quality compliance

Specifications

BrandCameron Sino
ModelCP60, CP60G
Part NumberBA-0064A4, BCP60ACC00002, BCP60ACC00106
Specifications58.14 x 37.60 x 28.70
Battery Pack58.14 x 37.60 x 28.70
Battery Capacity4400mAh / 16.28Wh
Battery Voltage3.7 volts

Questions about this item

Will the 58.14 x 37.60 x 28.70 mm dimensions match the CP60 battery compartment exactly?

Yes, the pack measures 58.14 by 37.60 by 28.70 mm and is built to the same specifications as the original CipherLAB BA-0064A4 battery for the CP60 and CP60G.

How do I install the replacement pack and what step causes the most trouble?

Remove the old pack, align the new battery's connector with the scanner socket, press firmly until it clicks, then close the latch; the step most often missed is fully seating the connector before locking the cover.

After how many charge cycles will the 4400 mAh capacity reach its best runtime?

The manufacturer states the cell reaches peak performance after 2 or 3 complete charge and discharge cycles.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.