We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular nickel-zinc battery pack, dark plastic casing, wire connector visible

Cameron Sino Battery for CECOTEC Conga 2299 2600mAh 14.4V

SKU CH-AHEP-NNV7W

Replacement battery for CECOTEC Conga 2299 and compatible robot vacuums, 2600mAh 14.4V nickel-zinc pack with decoded chip

  • Specifications69.50 x 37.00 x 37.00
  • Typenickel_zinc
  • Battery Pack69.50 x 37.00 x 37.00
  • Battery Typenickel_zinc
  • Battery Capacity2600.00 milliamp_hours
  • Battery Voltage14.40 volts
  • 2600 mAh capacity extends robot run-time
  • 4 V nickel-zinc chemistry matches original spec
  • 5 × 37 × 37 mm form-factor fits Conga 2299 bay
  • Fully decoded chip communicates with robot firmware
  • ISO 9001, RoHS and CE certified for safety

Replacement Battery for CECOTEC Conga 2299

This 14.4 V nickel-zinc pack replaces the original cell in the Conga 2299 and Conga 2299 Ultra Home VITAL robot vacuums. It delivers a rated capacity of 2600 mAh and 37.44 Wh. The pack uses a fully decoded chip so the vacuum recognises it immediately. Dimensions are 69.50 x 37.00 x 37.00 mm.

Drop-in fit for supported robot vacuums

The battery slots into the existing compartment without modification and connects to the original wiring harness. It supports the Conga 2299 series as well as Create NETBOT S18, ETA Nico 2219 and Trifo M662 models. No extra tools or adapters are required beyond what the vacuum already provides. The pack weighs approximately 200 g.

Sustained runtime with built-in protection

Integrated circuitry guards against overcharge, over-discharge, over-voltage and short circuits during long cleaning cycles. The chemistry maintains steady output across the full discharge curve rather than fading after a short burst. A new pack reaches its best runtime after two or three complete charge and discharge cycles.

Highlights

  • 2600 mAh capacity extends robot run-time
  • 4 V nickel-zinc chemistry matches original spec
  • 5 × 37 × 37 mm form-factor fits Conga 2299 bay
  • Fully decoded chip communicates with robot firmware
  • ISO 9001, RoHS and CE certified for safety

Specifications

Brandcameron sino
ModelCECOTEC Conga 2299 Conga 2299 Ultra Home VITAL Neebo White Laser Trifo M662 Ironpie M6 Ironpie M6+ M6 M6+ T6 ETA Nico Nico 2219 Ikohs Create Netbot S18
Part NumberCECOTEC ICR18650-14 3.H-7201-XR001A-006 Ikohs INR18650 M26-4S1P(LG)
Specifications69.50 x 37.00 x 37.00
Typenickel_zinc
Battery Pack69.50 x 37.00 x 37.00
Battery Typenickel_zinc
Battery Capacity2600.00 milliamp_hours
Battery Voltage14.40 volts

Questions about this item

How long will the 2600 mAh 14.4 V pack keep the Conga 2299 running before it needs recharging?

The pack stores 37.44 Wh; actual run time depends on the robot's power draw and the floor type you clean.

Does the nickel-zinc chemistry run hot or make the vacuum louder during a full-day cleaning session?

Nickel-zinc cells stay cool under normal loads and add no audible noise beyond the vacuum's own motors.

Which original part number must my robot already use for this replacement to fit?

It replaces CECOTEC ICR18650-14 and 3.H-7201-XR001A-006, used in Conga 2299, 2299 Ultra Home VITAL and listed compatibles.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.