We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular nickel-zinc battery pack, grey plastic casing with label, 69 by 35.5 by 51.7 mm

Cameron Sino Battery for Cavotec Microcontrol MC-1000/MC-2000 700mAh 6.0V

SKU CH-QMMF-C8W6S

Nickel-zinc replacement battery delivering 700 mAh at 6.0 V for Cavotec MC-1000 and MC-2000 transmitters

  • Specifications69.00 x 35.50 x 51.70
  • Typenickel_zinc
  • Battery Pack69.00 x 35.50 x 51.70
  • Battery Typenickel_zinc
  • Battery Capacity700.00 milliamp_hours
  • Battery Voltage6.00 volts
  • 700 mAh capacity powers the remote for longer operating time
  • 0 V nickel-zinc chemistry matches the original specification exactly
  • 00 × 35.50 × 51.70 mm dimensions fit the MC-1000 and MC-2000 battery compartment
  • ISO9001, RoHS and CE certification confirms manufacturing quality standards
  • Fully decoded chip works like the original without compatibility issues

Compatible Crane Remote Battery

This Cameron Sino battery replaces the Cavotec B02000 and M5-1051-1000 packs used in Microcontrol MC-1000 and MC-2000 transmitters. It delivers 700mAh capacity at 6.0V using nickel-zinc chemistry. The unit is new and carries ISO9001, RoHS and CE certification. It targets operators who need a direct replacement for a depleted original pack.

Drop-In Fit for Existing Chassis

The pack measures 69.00 x 35.50 x 51.70 mm and weighs 84.0g, matching the original mechanical envelope. A fully decoded chip communicates with the transmitter without adapter cables or firmware changes. Built-in protection guards against overcharge, over-discharge, over-voltage and short circuit. No extra mounting hardware is required.

Upgrade From Worn Original Cells

The battery restores full runtime when the factory pack no longer holds a charge through a shift. It is not suited for users who need higher capacity than 700mAh or a different voltage platform. The jump is worth it when the existing pack shows reduced operating time or fails to complete a duty cycle. Store below 60 140 and cycle two to three times for best performance.

Highlights

  • 700 mAh capacity powers the remote for longer operating time
  • 0 V nickel-zinc chemistry matches the original specification exactly
  • 00 × 35.50 × 51.70 mm dimensions fit the MC-1000 and MC-2000 battery compartment
  • ISO9001, RoHS and CE certification confirms manufacturing quality standards
  • Fully decoded chip works like the original without compatibility issues

Specifications

Brandcameron sino
ModelBissell ICONpet Cordless 2288 Microcontrol MC-2000 Transmitter
Part NumberSkullcandy B02000 M5-1051-1000
Specifications69.00 x 35.50 x 51.70
Typenickel_zinc
Battery Pack69.00 x 35.50 x 51.70
Battery Typenickel_zinc
Battery Capacity700.00 milliamp_hours
Battery Voltage6.00 volts

Questions about this item

How long will the 700mAh capacity last during continuous crane remote operation?

The 700mAh nickel-zinc pack delivers 4.20Wh at 6.0V; runtime depends on the transmitter's current draw, so check the MC-1000 or MC-2000 manual for typical operating hours.

Does the battery get hot or noisy when powering the remote all day?

Nickel-zinc chemistry runs silently with no moving parts; the supplier cautions against storage above 60°C (140°F) but gives no specific heat-rise figure for sustained use.

Which original part numbers must my Cavotec transmitter already use for this replacement to fit?

This pack replaces Cavotec part numbers B02000 and M5-1051-1000 and fits Microcontrol MC-1000 Transmitt and MC-2000 Transmitt crane remotes.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.