We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular nickel-zinc battery pack 79.30 by 62.00 by 33.10 mm, dark finish, labelled 4.8 V 2000 mAh

Cameron Sino Battery for Cattron Theimeg LRC 2000mAh 4.8V

SKU CH-3BPV-QZYB6

Nickel-zinc replacement pack for Cattron Theimeg LRC crane remotes, 2000 mAh at 4.8 V

  • Specifications79.30 x 62.00 x 33.10
  • Typenickel_zinc
  • Battery Pack79.30 x 62.00 x 33.10
  • Battery Typenickel_zinc
  • Battery Capacity2000.00 milliamp_hours
  • Battery Voltage4.80 volts
  • Replacement for Cattron Theimeg LRC, LRC-L, LRC-M crane remotes
  • 2000 mAh nickel-zinc pack delivers 9.60 Wh at 4.8 V
  • Exact 79.30 x 62.00 x 33.10 mm fit matches original dimensions
  • ISO 9001, RoHS and CE certified with decoded chip and protection circuits
  • Ready-to-install with online video guides and 138.0 g weight

Replacement Battery for Crane Remotes

This Cameron Sino battery replaces the original power pack in Cattron Theimeg LRC, LRC-L and LRC-M crane remote controls. It is built to the same specifications as the factory unit and includes a fully decoded chip for direct compatibility. The nickel-zinc chemistry delivers 4.8 volts and 2000 milliamp hours of capacity. Installers can follow widely available online videos for a straightforward swap.

Matching Part Numbers Confirm Fit

The decisive check is the part number printed on your existing battery. This unit covers Cattron Theimeg references 1BAT-7706-A201 and BE023-00122, along with the related variants 1BAT-7706-A101.E, 1BAT-7706-A101-G and BE023-00075. If your remote uses any of those codes the battery will connect and communicate correctly. A different part number means this pack is not the right match.

Capacity and Runtime Limits

At 2000 milliamp hours and 9.60 watt-hours the pack powers a typical crane remote through a full shift of intermittent use. Heavy continuous transmission will drain it faster and require mid-day recharging. The nickel-zinc cells reach peak capacity after two or three complete charge cycles. The physical envelope measures 79.30 by 62.00 by 33.10 millimetres, so verify the compartment dimensions before ordering.

Highlights

  • Replacement for Cattron Theimeg LRC, LRC-L, LRC-M crane remotes
  • 2000 mAh nickel-zinc pack delivers 9.60 Wh at 4.8 V
  • Exact 79.30 x 62.00 x 33.10 mm fit matches original dimensions
  • ISO 9001, RoHS and CE certified with decoded chip and protection circuits
  • Ready-to-install with online video guides and 138.0 g weight

Specifications

BrandCameron Sino
ModelLRC, LRC-L, LRC-M, LRC-Mund
Part Number1BAT-7706-A101.E, 1BAT-7706-A101-G, 1BAT-7706-A201, BE023-00075, BE023-00122
Specifications79.30 x 62.00 x 33.10
Typenickel_zinc
Battery Pack79.30 x 62.00 x 33.10
Battery Typenickel_zinc
Battery Capacity2000.00 milliamp_hours
Battery Voltage4.80 volts

Questions about this item

How long will the 2000 mAh capacity run a Cattron Theimeg LRC remote?

Runtime depends on the remote's power draw; the 9.60 Wh rating gives the total energy available for calculating expected operating time.

What does the 4.8 V nickel-zinc chemistry mean for charging?

It requires a charger designed for 4.8 V nickel-zinc packs; using a charger for other chemistries or voltages can damage the battery.

Will the 79.30 x 62.00 x 33.10 mm pack fit the LRC-M battery compartment?

Yes, those are the exact dimensions specified for the LRC, LRC-L and LRC-M models, and the pack weighs 138.0 g.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.