Cameron Sino Battery for CaddX ZeroWire ZW-BS01 2000mAh 7.2V
Replacement nickel-zinc battery for CaddX ZeroWire control panels, 2000 mAh at 7.2 V with ISO 9001, RoHS and CE certification
- Specifications87.20 x 51.80 x 14.80
- Typenickel_zinc
- Battery Pack87.20 x 51.80 x 14.80
- Battery Typenickel_zinc
- Battery Capacity2000.00 milliamp_hours
- Battery Voltage7.20 volts
- Compatible replacement for CaddX ZeroWire ZW-BS01 panel
- 2000 mAh nickel-zinc cell delivers 14.40 Wh capacity
- 2 V output matches original specification exactly
- Certified to ISO 9001, RoHS and CE standards
- Compact 87.20 x 51.80 x 14.80 mm form factor fits original bay
Replacement Battery for CaddX ZeroWire Control Panel
This nickel-zinc battery pack replaces the original CaddX ZW-BS01 unit in the ZeroWire Control Panel. It delivers 2000mAh capacity at 7.2 volts and matches the 87.20 x 51.80 x 14.80mm form factor. The integrated chip is fully decoded to work like the factory cell. Buyers who need a different voltage or chemistry cannot use this pack.
Included Protection Circuit and Packaging
The cell incorporates overcharge, over-discharge, over-voltage and short-circuit protection for safer operation. A shock-absorbing foam insert cushions the battery during transport. No charger, cables or mounting hardware are supplied in the box. Installers who expect a complete kit with a charger must source those items separately.
Straightforward Swap with Connector Care
Installation videos are widely available online and the process is described as very easy. The critical step is ensuring the connector seats properly before closing the panel. A new battery reaches peak performance after two or three full charge cycles. Users who ignore the connector alignment or use a low-quality charger risk reduced lifespan or immediate failure.
Highlights
- Compatible replacement for CaddX ZeroWire ZW-BS01 panel
- 2000 mAh nickel-zinc cell delivers 14.40 Wh capacity
- 2 V output matches original specification exactly
- Certified to ISO 9001, RoHS and CE standards
- Compact 87.20 x 51.80 x 14.80 mm form factor fits original bay
Specifications
| Brand | cameron sino |
|---|---|
| Model | CaddX ZeroWire Control Panel ZW-6404-NL |
| Part Number | CaddX ZW-BS01 |
| Specifications | 87.20 x 51.80 x 14.80 |
| Type | nickel_zinc |
| Battery Pack | 87.20 x 51.80 x 14.80 |
| Battery Type | nickel_zinc |
| Battery Capacity | 2000.00 milliamp_hours |
| Battery Voltage | 7.20 volts |
Questions about this item
How often will the 2000mAh nickel-zinc pack need replacing in a CaddX ZeroWire control panel?
Expect two to three full charge-discharge cycles before the pack reaches peak capacity; typical service life matches the original ZW-BS01 battery under normal alarm-panel duty.
What stops the battery first during a long power-outage — voltage drop or capacity limit?
The 7.2 V nickel-zinc chemistry delivers its rated 2000 mAh until voltage falls below the panel's minimum operating threshold, so usable runtime is set by the 14.40 Wh capacity.
Does the pack run hot or draw extra power when the panel stays armed 24/7?
Nickel-zinc cells generate minimal heat during standby; the built-in protection circuit only draws micro-amps for over-voltage and short-circuit monitoring.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



