Cameron Sino Battery for Burton UV604 LED 2600mAh 9.62Wh
Replacement battery for Burton UV604 LED electronic magnifier, 2600 mAh 3.7 V 9.62 Wh with built-in protection circuits
- Specifications68.60 x 18.60 x 18.60
- Battery Pack68.60 x 18.60 x 18.60
- Battery Capacity2600.00 milliamp_hours
- Battery Voltage3.7 volts
- Direct replacement for Burton UV604 LED
- 2600 mAh capacity for extended runtime
- 7 V output matches original spec
- Compact 68.60 x 18.60 x 18.60 mm form
- Built-in protection against overcharge and short circuit
Compatible replacement battery
The Cameron Sino battery replaces the Burton UV604 LED power pack using part numbers 4000428 and 60000412. It delivers a capacity of 2600mAh at 3.7 volts for 9.62Wh of energy. The cell measures 68.60 x 18.60 x 18.60mm and weighs 38.0g. A fully decoded chip ensures it works like the original unit.
Thermal and power behaviour
The lithium-ion cell operates at a nominal 3.7 volts and is rated for storage temperatures up to 60°C. Built-in protection guards against overcharge, over-discharge, over-voltage and short circuits. The pack is certified to ISO9001, RoHS and CE standards. No active cooling is required during normal magnifier use.
Sustained load characteristics
The 2600mAh capacity supports extended viewing sessions before recharge is needed. A new battery reaches peak performance after two or three full charge and discharge cycles. Using a low-quality charger can shorten overall service life. The rechargeable design is built for repeated daily cycling in the UV604 LED magnifier.
Highlights
- Direct replacement for Burton UV604 LED
- 2600 mAh capacity for extended runtime
- 7 V output matches original spec
- Compact 68.60 x 18.60 x 18.60 mm form
- Built-in protection against overcharge and short circuit
Specifications
| Brand | cameron sino |
|---|---|
| Model | Burton UV604 LED |
| Part Number | Burton 4000428 60000412 |
| Specifications | 68.60 x 18.60 x 18.60 |
| Battery Pack | 68.60 x 18.60 x 18.60 |
| Battery Capacity | 2600.00 milliamp_hours |
| Battery Voltage | 3.7 volts |
Questions about this item
How do I install the replacement battery in my Burton UV604 LED and what connector step is often missed?
Align the 68.60 x 18.60 x 18.60 mm pack, insert it, and ensure the connector is fully seated; a loose connection will prevent the magnifier from powering on.
What maintenance will this 2600mAh 3.7V battery need over its service life?
Run two or three full charge and discharge cycles when new to reach rated 9.62Wh capacity, then avoid low-quality chargers and store below 60 °C to maximise cycle life.
What is the first limit reached during prolonged use of the UV604 LED on this pack?
The 2600mAh capacity sets runtime; under continuous load the voltage will sag to the protection cutoff before thermal limits are reached.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



