We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular lithium polymer battery pack, dark casing, 69 by 56 by 19 mm

Cameron Sino Battery for Brady M511 Y5087828 3350mAh 10.8V

SKU CH-404M-WHX1T

Lithium-polymer replacement cell rated 3350 mAh at 10.8 V fits Brady M511 label printers

  • Specifications69.00 x 56.00 x 19.00
  • Typelithium_polymer
  • Battery Pack69.00 x 56.00 x 19.00
  • Battery Typelithium_polymer
  • Battery Capacity3350.00 milliamp_hours
  • Battery Voltage10.80 volts
  • Replacement battery for Brady M511 label printers
  • 3350 mAh capacity delivers 36.18 Wh of energy
  • 8 V lithium-polymer chemistry matches original spec
  • ISO 9001, RoHS and CE certified for safety
  • Compact 69.00 x 56.00 x 19.00 mm form factor

Replacement Battery for Brady M511

The Cameron Sino lithium-polymer pack is built to match the original specifications for the Brady M511 label printer. It delivers 3350mAh at 10.8V and fits the 69.00 x 56.00 x 19.00mm form factor. Certified to ISO9001, RoHS and CE standards, it includes overcharge, over-discharge, over-voltage and short-circuit protection. The fully decoded chip communicates with the printer exactly like the factory cell.

Upgrade from a depleted original cell

When the stock battery no longer holds enough charge for a full shift, this pack restores the printer’s rated runtime without modification. The jump is worth it if the device shuts down early, shows inflated casing or fails to charge past a low percentage. A new unit reaches peak capacity after two or three complete charge-discharge cycles. Buyers who need a higher-capacity chemistry or a different voltage platform will not be served by this direct replacement.

3350mAh capacity for mobile labelling work

At 36.18Wh the pack powers typical indoor and outdoor labelling sessions through a full day of intermittent printing. Heavy continuous use with maximum feed rates will drain it faster, requiring a recharge before the next shift. The 152.0g weight keeps the printer balanced in hand. Users who run multiple printers from one charger or need hot-swap capability should plan for additional packs.

Highlights

  • Replacement battery for Brady M511 label printers
  • 3350 mAh capacity delivers 36.18 Wh of energy
  • 8 V lithium-polymer chemistry matches original spec
  • ISO 9001, RoHS and CE certified for safety
  • Compact 69.00 x 56.00 x 19.00 mm form factor

Specifications

BrandCameron Sino
ModelM511
Part NumberY5087828
Specifications69.00 x 56.00 x 19.00
Typelithium_polymer
Battery Pack69.00 x 56.00 x 19.00
Battery Typelithium_polymer
Battery Capacity3350.00 milliamp_hours
Battery Voltage10.80 volts

Questions about this item

What are the exact dimensions of the 69.00 x 56.00 x 19.00 mm battery pack for the Brady M511?

The replacement pack measures 69.00 mm long, 56.00 mm wide and 19.00 mm thick, matching the original Brady Y5087828 footprint.

Which connector orientation should I check when installing the 10.8 V lithium-polymer pack in the M511?

Align the pack's connector with the M511's socket and press firmly until it clicks; the most common mistake is inserting it offset by one pin row.

How often should I run a full charge-discharge cycle on the 3350 mAh pack to maintain capacity?

Perform a complete charge and discharge every few months; the manufacturer notes a new battery reaches best performance after 2 or 3 cycles.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.