We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular black battery pack with connector for Brady BMP71 printer

Cameron Sino Battery for Brady BMP71 M71-BATT 2000mAh 12V

SKU CH-FFHP-Y4A9G

Replacement 2000 mAh 12 V battery for Brady BMP71 portable printers with decoded chip and protection circuits

  • Specifications102.10 x 64.54 x 32.95
  • Battery Pack102.10 x 64.54 x 32.95
  • Battery Capacity2000.00 milliamp_hours
  • Battery Voltage12 volts
  • 2000 mAh capacity powers the Brady BMP71 printer longer
  • 12 volt output matches the original M71-BATT specification
  • 10 x 64.54 x 32.95 mm dimensions fit the battery compartment exactly
  • ISO9001, RoHS and CE certified for safety compliance
  • Fully decoded chip works like the original battery

Compatible replacement for Brady BMP71

This rechargeable lithium-ion pack replaces the original Brady M71-BATT battery used in BMP71 portable label printers. It delivers 2000mAh capacity at 12 volts, matching the factory energy rating of 24.00Wh. The unit measures 102.10 x 64.54 x 32.95mm and weighs 322.6g, fitting the printer’s battery compartment without modification.

Fully decoded chip and protective circuitry

A new fully decoded chip communicates with the printer exactly like the original battery, so the fuel gauge and charging logic function normally. Built-in protection guards against overcharge, over-discharge, over-voltage and short-circuit events, helping to preserve cell health over repeated cycles. The pack ships in shock-absorbing foam to prevent transit damage.

Drop-in installation with standard connector

The battery uses the same connector layout as the OEM pack, allowing a direct swap without tools or soldering. Installation videos are widely available online for first-time users. The housing is built to the same dimensional specifications as the original, so the printer’s latch and door close securely. Buyers needing a higher-capacity pack or a different voltage will not be served by this model.

Highlights

  • 2000 mAh capacity powers the Brady BMP71 printer longer
  • 12 volt output matches the original M71-BATT specification
  • 10 x 64.54 x 32.95 mm dimensions fit the battery compartment exactly
  • ISO9001, RoHS and CE certified for safety compliance
  • Fully decoded chip works like the original battery

Specifications

BrandCameron Sino
ModelBMP71
Part NumberM71-BATT
Specifications102.10 x 64.54 x 32.95
Battery Pack102.10 x 64.54 x 32.95
Battery Capacity2000.00 milliamp_hours
Battery Voltage12 volts

Questions about this item

How many charge cycles before the 2000mAh 12V pack needs replacing?

The battery reaches its best performance after 2 or 3 full charge and discharge cycles and is designed to match the original M71-BATT specifications for service life.

What stops the 12V 24.00Wh battery from running continuously in the BMP71 printer?

The 2000mAh capacity is the limiting factor; runtime ends when the pack is depleted and it must be recharged before further use.

Does the 12V 2000mAh battery get hot or noisy during all-day printing?

The pack has built-in overcharge, over-discharge, over-voltage and short-circuit protection and contains no moving parts, so it operates silently with minimal heat rise.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.