We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Cameron Sino Battery for Black&Decker SSC1000 478669-00 2200mAh 7.2V

SKU CH-4B88-XZTA7

Nickel-zinc replacement battery for the Black&Decker SSC1000, 2200 mAh at 7.2 V with a fully decoded chip and 15.84 Wh capacity

  • Specifications60.70 x 44.20 x 36.20
  • Typenickel_zinc
  • Battery Pack60.70 x 44.20 x 36.20
  • Battery Typenickel_zinc
  • Battery Capacity2200.00 milliamp_hours
  • Battery Voltage7.20 volts
  • 2200 mAh capacity extends vacuum runtime
  • 2 V nickel-zinc chemistry matches original spec
  • 7 × 44.2 × 36.2 mm fits SSC1000 battery bay
  • ISO 9001 RoHS CE certified for safety compliance
  • Fully decoded chip enables direct replacement install

Replacement Battery for SSC1000

This nickel-zinc pack replaces the original 478669-00 cell in Black&Decker SSC1000 vacuums. It ships new and ready for installation after a simple connector fit. The 2200mAh capacity at 7.2V matches the factory rating.

Voltage and capacity match

The single specification that decides fit is the 7.2V 2200mAh rating paired with the 478669-00 part number. If your original battery shows different voltage or a different part code this pack will not work. Dimensions of 60.70 x 44.20 x 36.20mm confirm physical compatibility.

Sustained runtime behaviour

After two or three full charge cycles the pack delivers its rated 15.84Wh steadily through a cleaning session. Nickel-zinc chemistry maintains voltage without the sharp drop seen in short bursts. Built-in protection guards against overcharge over-discharge and short circuit during extended use.

Highlights

  • 2200 mAh capacity extends vacuum runtime
  • 2 V nickel-zinc chemistry matches original spec
  • 7 × 44.2 × 36.2 mm fits SSC1000 battery bay
  • ISO 9001 RoHS CE certified for safety compliance
  • Fully decoded chip enables direct replacement install

Specifications

Brandcameron Sion
ModelBlack&Decker SSC1000
Part NumberBlack&Decker 478669-00
Specifications60.70 x 44.20 x 36.20
Typenickel_zinc
Battery Pack60.70 x 44.20 x 36.20
Battery Typenickel_zinc
Battery Capacity2200.00 milliamp_hours
Battery Voltage7.20 volts

Questions about this item

How long will the 2200 mAh capacity run my SSC1000 vacuum between charges?

Runtime depends on the vacuum's power draw; the 15.84 Wh rating lets you estimate run-time by dividing it by the motor's wattage.

What does the 7.2 V nickel-zinc chemistry mean for charging?

The pack delivers a nominal 7.2 V and requires a charger designed for nickel-zinc cells at that voltage.

Will the 60.70 x 44.20 x 36.20 mm pack fit the SSC1000 battery bay?

Those dimensions match the original 478669-00 pack, so it seats directly in the SSC1000 compartment.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.