We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular nickel-zinc battery pack, matte finish, labelled for Besam Unislide II

Cameron Sino Battery for Besam Unislide II 1500mAh 18.00Wh

SKU CH-QW8X-5HVZX

Nickel-zinc 12.00 V 1500 mAh replacement battery for Besam Unislide II sliding door operators

  • Specifications74.50 x 31.80 x 53.40
  • Typenickel_zinc
  • Battery Pack74.50 x 31.80 x 53.40
  • Battery Typenickel_zinc
  • Battery Capacity1500.00 milliamp_hours
  • Battery Voltage12.00 volts
  • Compatible replacement for Besam Unislide II sliding doors
  • 1500mAh nickel-zinc chemistry delivers 18.00Wh at 12.00V
  • Compact 74.50 x 31.80 x 53.40mm pack fits original housing
  • Built-in protection against overcharge, over-discharge and short circuit
  • ISO9001, RoHS and CE certified for safety and quality

Compatible Replacement Battery

This Cameron Sino battery replaces the original power pack for Besam Unislide II sliding-door operators. It delivers 1500mAh at 12.00 volts using nickel-zinc chemistry and measures 74.50 x 31.80 x 53.40 mm. The unit is supplied new and carries ISO9001, RoHS and CE certifications.

Ideal for Facility Maintenance Teams

Maintenance engineers servicing Besam Unislide II, Pure Move or Pure Move DAB Digital radio units can install this pack directly. It is not suitable for installers who need a different voltage, a higher capacity or a battery chemistry other than nickel-zinc.

Verify Part Numbers Before Ordering

Confirm that the original battery carries one of the listed part numbers such as 33550475, 45A020BA00004, 550473 or 550475. Check that the connector layout matches the existing pack and that the sliding-door controller accepts a 12.00 V nickel-zinc supply.

Highlights

  • Compatible replacement for Besam Unislide II sliding doors
  • 1500mAh nickel-zinc chemistry delivers 18.00Wh at 12.00V
  • Compact 74.50 x 31.80 x 53.40mm pack fits original housing
  • Built-in protection against overcharge, over-discharge and short circuit
  • ISO9001, RoHS and CE certified for safety and quality

Specifications

Brandcameron Sion
ModelAssa Abloy 550473 550475 Slimdrive Unislide Unislide II Sliding Door 33550475 Unislide II Sliding Door 45A020BA00004 EM PSL100 EM PSL150
Part NumberAssa Abloy 1008425 330000375 Besam 121264 RHC132V006 45A020BA00004 33550475 550473 550475 1000234 738753 MFH9001 80100203 1008425 GPHC132MOU 10VHAA1500 10VH1500
Specifications74.50 x 31.80 x 53.40
Typenickel_zinc
Battery Pack74.50 x 31.80 x 53.40
Battery Typenickel_zinc
Battery Capacity1500.00 milliamp_hours
Battery Voltage12.00 volts

Questions about this item

What Besam Unislide II part numbers must match for this 1500mAh 12.00V battery to be compatible?

It replaces Besam 33550475 and 45A020BA00004; cross-references include 330000375, 121264, 550473, 550475, 1008425, 738753, 1000234, 80100203, MFH9001, GPHC132MOU, 10VHAA1500 and 10VH1500.

Will the 74.50 x 31.80 x 53.40 mm nickel-zinc pack fit the same compartment as the original Besam battery?

Yes — those dimensions match the OEM pack for Unislide II, Unislide, Slimdrive, EM PSL100 and EM PSL150 operators.

How can I confirm the 18.00Wh replacement is working after installation?

The door operator should complete full open/close cycles without power loss; a new pack reaches rated capacity after two or three full charge-discharge cycles.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.