We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular nickel-zinc battery pack with dark casing and connector, 67.90 by 45.97 by 42.80 mm

Cameron Sino Battery for B.Braun McGaw Vista Basic Infusion Pump 3000mAh 7.2V

SKU CH-5H1C-PVDA6

Nickel-zinc replacement battery delivers 3000 mAh at 7.2 V for B.Braun McGaw Vista Basic infusion pumps

  • Specifications67.90 x 45.97 x 42.80
  • Typenickel_zinc
  • Battery Pack67.90 x 45.97 x 42.80
  • Battery Typenickel_zinc
  • Battery Capacity3000.00 milliamp_hours
  • Battery Voltage7.20 volts
  • Reliable power for B.Braun McGaw Vista Basic infusion pumps
  • 3000 mAh nickel-zinc chemistry delivers 21.60 Wh capacity
  • 2 V output matches original equipment specifications
  • Compact 67.90 x 45.97 x 42.80 mm form factor fits existing battery bay
  • Built-in protection against overcharge, over-discharge, over-voltage and short circuit

Compatible Infusion Pump Battery

This Cameron Sino battery replaces the original power source for B.Braun McGaw Vista Basic infusion pumps. It is built for clinical environments where reliable portable power is essential for patient care. The nickel-zinc chemistry delivers stable voltage during extended shifts. Medical staff and biomedical technicians will find it a direct fit for the listed pump models.

3000 mAh 7.2 V Nickel-Zinc Pack

The single specification that determines compatibility is the 3000 mAh capacity at 7.2 volts in a nickel-zinc pack measuring 67.90 x 45.97 x 42.80 mm. Part numbers 33175551, 34502556 and OM11443 must match the original battery label exactly. A different voltage or chemistry will not work in the Vista Basic pump. Verify the part number before purchase.

Pre-Installed Decoded Chip And Protection Circuit

The bundled fully decoded chip allows the battery to communicate with the pump's fuel gauge exactly like the factory unit. Overcharge, over-discharge, over-voltage and short-circuit protection circuits are integrated into the pack. Shock-absorbing foam in the packaging protects the cells during transport. No extra accessories or software are included.

Highlights

  • Reliable power for B.Braun McGaw Vista Basic infusion pumps
  • 3000 mAh nickel-zinc chemistry delivers 21.60 Wh capacity
  • 2 V output matches original equipment specifications
  • Compact 67.90 x 45.97 x 42.80 mm form factor fits existing battery bay
  • Built-in protection against overcharge, over-discharge, over-voltage and short circuit

Specifications

BrandCameron Sino
ModelMcGaw Vista Basic Infusion Pum, Vista Basic, Vista Basic Infusion Pump
Part Number33175551, 34502556, OM11443
Specifications67.90 x 45.97 x 42.80
Typenickel_zinc
Battery Pack67.90 x 45.97 x 42.80
Battery Typenickel_zinc
Battery Capacity3000.00 milliamp_hours
Battery Voltage7.20 volts

Questions about this item

How long will the 3000 mAh capacity actually run a Vista Basic infusion pump?

At 7.2 V the pack stores 21.60 Wh; runtime equals 21.60 Wh divided by the pump's average power draw, so a 5 W load would yield roughly 4.3 hours.

What connector standard does the battery use to mate with the pump?

The pack is built to the exact original specifications for part numbers 33175551, 34502556 and OM11443, so its connector matches the factory interface on the Vista Basic infusion pump.

Will the 67.90 × 45.97 × 42.80 mm pack fit the battery compartment without modification?

Yes — those dimensions replicate the OEM battery, and the 336 g weight matches the original, so it seats directly in the Vista Basic pump's compartment.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.