Cameron Sino Battery for Ascom FuG11B SE110 SE140 1200mAh 7.5V
Replacement 1200 mAh 7.5 V lithium-ion battery for Ascom FuG11B, SE110 and SE140 two-way radios
- Battery Capacity1200.00 milliamp_hours
- Battery Voltage7.50 volts
- Compatible with Ascom FuG11B SE110 SE140 radios
- 1200mAh capacity at 7.5V for extended talk time
- Built-in protection against overcharge and short circuits
- ISO9001 RoHS and CE certified for safety compliance
- Fully decoded chip works like the original battery
Compatible Replacement Battery
The Cameron Sino battery replaces the original Ascom CPA141 and CPA2800 packs used in FuG11B, SE110 and SE140 two-way radios. It is a new lithium-ion cell with a fully decoded chip that works like the factory unit. The pack carries ISO9001, RoHS and CE certifications. It is intended for radio operators who need a direct drop-in spare.
1200 mAh Capacity and Runtime
Rated at 1200 mAh and 9.00 Wh, the pack delivers 7.50 volts to the radio. This capacity supports typical shift-length voice use on a single charge. Runtime shortens with high transmit power or continuous scanning. The battery reaches its best performance after two or three full charge and discharge cycles.
7.5 V Interface and Practical Limits
The 7.50 V output matches the radio’s native rail, so no step-up or step-down circuitry is required. Over-charge, over-discharge, over-voltage and short-circuit protection are built into the pack. Do not disassemble, expose to fire or water, or store above 60 °C. A low-quality third-party charger will reduce service life.
Highlights
- Compatible with Ascom FuG11B SE110 SE140 radios
- 1200mAh capacity at 7.5V for extended talk time
- Built-in protection against overcharge and short circuits
- ISO9001 RoHS and CE certified for safety compliance
- Fully decoded chip works like the original battery
Specifications
| Brand | cameron sino |
|---|---|
| Model | AEG Teleport ES Ascom FUG 11B SE140 FuG11B SE110 SE140 |
| Part Number | AEG CPA141 CPA2800 Ascom ASCAK141 CPA141 CPA2800 |
| Battery Capacity | 1200.00 milliamp_hours |
| Battery Voltage | 7.50 volts |
Questions about this item
Will the 1200 mAh 7.5 V pack fit my Ascom FuG11B and work with the original charger?
The battery matches part numbers CPA141 and CPA2800 and uses the same decoded chip as the original, so it fits the FuG11B, SE110 and SE140 and charges on the standard Ascom charger.
How can I verify the battery is functioning correctly after installation?
Insert the pack, power on the radio and confirm the fuel gauge shows charge; then complete two or three full charge and discharge cycles to reach rated 1200 mAh performance.
What comes in the package and do I need to buy a charger separately?
The box contains one 1200 mAh 7.5 V lithium-ion battery with protective foam; a charger is not included and must be supplied separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



