We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular lithium-polymer battery pack, black finish, 130 by 40 by 23 mm

Cameron Sino Battery for AKAI LIVE II MPC Live MK2 2600mAh 14.4V

SKU CH-ACH3-Y3YW7

Replacement lithium-polymer battery delivering 2600 mAh at 14.4 V for AKAI LIVE II, MPC Live and MPC Live MK2

  • Specifications130.00 x 40.00 x 23.00
  • Typelithium_polymer
  • Battery Pack130.00 x 40.00 x 23.00
  • Battery Typelithium_polymer
  • Battery Capacity2600.00 milliamp_hours
  • Battery Voltage14.40 volts
  • Compatible replacement for AKAI LIVE II, MPC Live, MPC Live MK2
  • 2600mAh capacity at 14.4V delivers 37.44Wh of power
  • Lithium polymer cell built to 130.00 x 40.00 x 23.00mm spec
  • ISO9001 certified production with overcharge, over-discharge and short-circuit protection
  • Fully decoded chip works like the original battery

Cameron Sino Replacement Battery for AKAI MPC Live

This lithium-polymer battery pack replaces the original power source in AKAI LIVE II, MPC Live and MPC Live MK2 units. It delivers 2600mAh capacity at 14.4 volts for 37.44Wh total energy. The pack measures 130.00 x 40.00 x 23.00mm and includes a fully decoded chip that communicates with the device exactly as the factory cell does.

Check your device model

Confirm the unit is a LIVE II, MPC Live or MPC Live MK2 and that the original battery carries part number 1ABTSB-DUPS-168 or BT4-YH001L. Verify the connector layout matches the replacement and plan for two to three full charge-discharge cycles to reach optimum runtime. Avoid low-quality third-party chargers as they can reduce service life.

Suits owners needing a direct drop-in cell

Ideal for musicians who rely on battery power during live sets or mobile sessions and want a safety-tested pack with overcharge, over-discharge, over-voltage and short-circuit protection. Not for users whose device uses a different form factor or voltage, or anyone expecting a higher-capacity upgrade beyond the stated 2600mAh.

Highlights

  • Compatible replacement for AKAI LIVE II, MPC Live, MPC Live MK2
  • 2600mAh capacity at 14.4V delivers 37.44Wh of power
  • Lithium polymer cell built to 130.00 x 40.00 x 23.00mm spec
  • ISO9001 certified production with overcharge, over-discharge and short-circuit protection
  • Fully decoded chip works like the original battery

Specifications

BrandCameron Sino
ModelLIVE II, MPC Live, MPC Live MK2
Part Number1ABTSB-DUPS-168, BT4-YH001L
Specifications130.00 x 40.00 x 23.00
Typelithium_polymer
Battery Pack130.00 x 40.00 x 23.00
Battery Typelithium_polymer
Battery Capacity2600.00 milliamp_hours
Battery Voltage14.40 volts

Questions about this item

What comes in the package and do I need any extra tools or cables to fit the battery?

The box contains one lithium-polymer battery measuring 130.00 x 40.00 x 23.00 mm with a fully decoded chip; no additional tools or cables are required for installation.

How do I confirm this 2600mAh 14.4V pack is the right one for my unit?

Match the part numbers 1ABTSB-DUPS-168 or BT4-YH001L and the model list LIVE II, MPC Live, MPC Live MK2 against your original battery label before ordering.

What runtime can I expect from the 37.44Wh rating in an actual MPC Live session?

The 37.44Wh capacity delivers the same energy as the original pack, so typical standalone session length is unchanged; actual hours depend on screen brightness, pad use and connected peripherals.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.