Cameron Sino Battery for AEG ErgoRapido Rapido 2000mAh 4.8V
Replacement lithium-ion battery for AEG ErgoRapido and Rapido vacuums, 2000mAh at 4.8V with ISO9001, RoHS and CE certification
- Specifications53.00 x 43.50 x 14.50
- Battery Pack53.00 x 43.50 x 14.50
- Battery Capacity2000 milliamp_hours
- Battery Voltage4.8 volts
- 2000 mAh capacity extends vacuum run time
- 8 V lithium-ion pack matches original specifications
- Compatible with AEG ErgoRapido and Rapido models
- Certified to ISO 9001, RoHS and CE standards
- Dimensions 53.00 x 43.50 x 14.50 mm fit original battery bay
Replacement Battery for AEG ErgoRapido and Rapido
This lithium-ion pack replaces the original 4.8 V battery used in AEG ErgoRapido and Rapido stick vacuums. It delivers a 2000 mAh capacity rated at 9.60 Wh and fits the exact 53.00 x 43.50 x 14.50 mm form factor. The built-in protection circuit guards against overcharge, over-discharge, over-voltage and short circuits. Buyers who need a higher voltage or larger capacity for extended runtime cannot use this pack.
Decoded Chip and Protective Packaging
A fully decoded chip allows the battery to communicate with the vacuum exactly like the original unit. The package includes shock-absorbing foam that protects the cells during transit. No charging adapter, tools or mounting hardware are supplied in the box. Installers who expect a bundled charger or specialised disassembly tools will need to source them separately.
Installation and Break-In Requirements
The supplier notes that peak performance is reached after two or three full charge and discharge cycles. Correct connector alignment is essential when fitting the pack into the vacuum housing. Storage above 60 °C (140 °F) is prohibited and the battery must never be disassembled, immersed in water or disposed of in fire. Users who cannot follow the break-in procedure or who operate in high-temperature environments should consider alternative power solutions.
Highlights
- 2000 mAh capacity extends vacuum run time
- 8 V lithium-ion pack matches original specifications
- Compatible with AEG ErgoRapido and Rapido models
- Certified to ISO 9001, RoHS and CE standards
- Dimensions 53.00 x 43.50 x 14.50 mm fit original battery bay
Specifications
| Brand | cameron Sion |
|---|---|
| Model | AG4104WD, AG5104WD, AG5104WDB, ErgoRapido, HX6-8DM-W, Rapido |
| Part Number | 405 52 51-53/4, 4055460655 |
| Specifications | 53.00 x 43.50 x 14.50 |
| Battery Pack | 53.00 x 43.50 x 14.50 |
| Battery Capacity | 2000 milliamp_hours |
| Battery Voltage | 4.8 volts |
Questions about this item
How many charge cycles before the 2000mAh lithium-ion pack needs replacement?
The battery uses lithium-ion chemistry rated at 4.8V and 9.60Wh; typical service life is several years with normal daily use and full charge-discharge cycles.
What stops the ErgoRapido running continuously — heat, voltage sag or protection circuit?
The pack includes over-charge, over-discharge, over-voltage and short-circuit protection that will cut power before cells overheat or voltage drops too low.
Does the replacement cell run hot or draw more watts than the original AEG 405 52 51-53/4?
It matches the original 4.8V 2000mAh specification and dimensions 53.00 x 43.50 x 14.50mm, so heat and power draw remain the same as the factory pack.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
iRobot 4910 robotic vacuum filter 3-pack
- Roomba 3pack Filter…
- 3 pack of replaceme…
3M MCO 19008 20 Inch 3500 Nat Blend Hi-Speed Burnish Pad Tan vacuum accessory
Bissell, Inc 32074 vacuum accessory replacement belt 2 pack
- Style 7/9/10/12/14…
- Black



