We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular lithium-ion battery pack, dark casing, wire connector visible

Cameron Sino Battery for Acutrac 22 Pro, Digisat Pro, MKII 700mAh 8.4V

SKU CH-0X21-G9KTJ

Replacement lithium-ion battery for Acutrac and Digisat satellite signal meters, 700 mAh at 8.4 V with ISO 9001, RoHS and CE certification

  • Specifications72.10 x 45.40 x 10.50
  • Battery Pack72.10 x 45.40 x 10.50
  • Battery Capacity700.00 milliamp_hours
  • Battery Voltage8.4 volts
  • Replaces original battery in Acutrac 22 Pro and Digisat Pro meters
  • 700 mAh capacity delivers 5.88 Wh for extended field use
  • 4 V output matches the meter's power requirement exactly
  • Certified to ISO 9001, RoHS and CE for safety compliance
  • Built-in protection guards against overcharge, over-discharge and short circuits

Compatible signal-meter replacement

This Cameron Sino lithium-ion battery fits the Acutrac 22 Pro, 22Pro MKII, Digiair, Digisat 3 Pro, Digisat Pro and MKII satellite signal meters. It replaces the original Acutrac NB-1X7 and PO201003 packs with a 700 mAh, 8.4 V cell delivering 5.88 Wh. The fully decoded chip communicates with the meter exactly as the factory unit does.

Upgrade from a depleted original

When the original pack no longer holds a full day of field measurements, this 700 mAh replacement restores the specified runtime without modifying the device. The jump is worth it if the meter shuts down early, shows erratic charge readings or the battery has swollen beyond the 72.10 x 45.40 x 10.50 mm footprint. ISO 9001, RoHS and CE certifications confirm the cell meets the same safety baseline as the OEM part.

Fits the existing battery compartment

The pack slides into the meter's original cavity using the same connector orientation, so no wiring changes or adapter plates are required. At 84.6 g it adds no noticeable weight to the handheld unit. Built-in over-charge, over-discharge, over-voltage and short-circuit protection guards the meter's charging circuit during long survey sessions. Shock-absorbing foam in the retail box protects the cell during transit to the job site.

Highlights

  • Replaces original battery in Acutrac 22 Pro and Digisat Pro meters
  • 700 mAh capacity delivers 5.88 Wh for extended field use
  • 4 V output matches the meter's power requirement exactly
  • Certified to ISO 9001, RoHS and CE for safety compliance
  • Built-in protection guards against overcharge, over-discharge and short circuits

Specifications

Brandcameron sino
ModelAcutrac 22 Pro Digisat Pro Digiair MKII Satellite signal meter Digisat 3 Pro 22Pro MKII
Part NumberAcutrac NB-1X7 PO201003
Specifications72.10 x 45.40 x 10.50
Battery Pack72.10 x 45.40 x 10.50
Battery Capacity700.00 milliamp_hours
Battery Voltage8.4 volts

Questions about this item

What are the exact dimensions I need to clear in the battery compartment for the 72.10 x 45.40 x 10.50 mm pack?

The replacement measures 72.10 mm long, 45.40 mm wide and 10.50 mm thick, so the cavity must accommodate at least those clearances.

Which connector orientation should I watch for when fitting the decoded chip to the Acutrac 22 Pro?

Align the plug so the keyed pins match the meter socket; the fully decoded chip seats only one way and clicks when fully inserted.

After how many charge cycles does the 700 mAh lithium-ion cell typically reach full capacity?

The manufacturer notes the new cell achieves its best performance after two or three complete charge and discharge cycles.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.