We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular lithium-ion cell, silver wrap, 53 by 34 by 9.8 mm

Cameron Sino Battery 1ICP10/34/50 1800mAh 3.6V

SKU CH-0G8C-3M6J3

A 3.6 V lithium-ion cell delivering 1800 mAh capacity in a 53.00 × 34.00 × 9.80 mm form factor for custom battery packs

  • Specifications53.00 x 34.00 x 9.80
  • Battery Pack53.00 x 34.00 x 9.80
  • Battery Capacity1800.00 milliamp_hours
  • Battery Voltage3.6 volts
  • 1800mAh capacity powers devices longer
  • 6V lithium-ion chemistry delivers stable voltage
  • 53×34×9.8mm size fits custom pack designs
  • ISO9001, RoHS and CE certified for safety
  • Built-in protection guards against overcharge and short circuits

Replacement Battery for Custom Packs

This lithium-ion cell replaces the original battery in devices that use the 1ICP10/34/50 part number. It delivers a nominal 3.6 V and 1800 mAh capacity, matching the factory specifications for direct compatibility. Builders and repair technicians can install it without adapting the existing connector or enclosure.

Thermal Behaviour and Power Profile

The cell operates within normal lithium-ion temperature limits and does not require active cooling in typical use. Internal protection circuitry guards against over-charge, over-discharge, over-voltage and short-circuit events, keeping power delivery stable. No audible noise is produced during charge or discharge cycles.

Build Quality and Connector Implications

Dimensions of 53.00 x 34.00 x 9.80 mm and a weight of 33.0 g allow the pack to fit the original battery compartment exactly. The fully decoded chip communicates with the host device exactly like the original unit, so no firmware workarounds are needed. Shock-absorbing foam in the packaging protects the cell during transit and handling.

Highlights

  • 1800mAh capacity powers devices longer
  • 6V lithium-ion chemistry delivers stable voltage
  • 53×34×9.8mm size fits custom pack designs
  • ISO9001, RoHS and CE certified for safety
  • Built-in protection guards against overcharge and short circuits

Specifications

BrandCameron Sino
ModelBattery For Custom Battery Packs
Part Number1ICP10/34/50
Specifications53.00 x 34.00 x 9.80
Battery Pack53.00 x 34.00 x 9.80
Battery Capacity1800.00 milliamp_hours
Battery Voltage3.6 volts

Questions about this item

How do I install the 1ICP10/34/50 battery and which step is most often missed?

Match the connector polarity, seat the 53.00 x 34.00 x 9.80 mm pack firmly, then run two or three full charge and discharge cycles so the new 1800mAh cell reaches rated capacity.

What maintenance or replacement will the 1800mAh lithium-ion cell need later?

Expect gradual capacity loss after several hundred cycles; replace the pack when run-time drops below your requirement, and always recycle the old cell rather than discarding it in fire or water.

What limit appears first during sustained use of the 3.6 V battery?

The protection circuit will cut output if voltage falls too low, if current exceeds the safe threshold, or if temperature rises above 60 °C, preventing over-discharge, short-circuit or thermal damage.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.