We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular lithium-polymer battery pack, matte finish, 40 by 34 by 6.7 mm

Cameron Sino BAT003 replacement battery for DLX LUXE IDOL TM40 X 800mAh 3.7V

SKU CH-VKYX-X7D2T

Lithium-polymer replacement cell rated 800 mAh at 3.7 V fits DLX LUXE IDOL, TM40 and X models

  • Specifications40.12 x 34.00 x 6.72
  • Typelithium_polymer
  • Battery Pack40.12 x 34.00 x 6.72
  • Battery Typelithium_polymer
  • Battery Capacity800.00 milliamp_hours
  • Battery Voltage3.70 volts_of_alternating_current
  • Ready to power your DLX LUXE IDOL, TM40 or X with 800 mAh capacity
  • Slim 40.12 x 34.00 x 6.72 mm lithium-polymer cell fits the original battery bay
  • Certified to ISO 9001, RoHS and CE for safe, reliable operation
  • Built-in protection guards against over-charge, over-discharge and short circuits
  • Fully decoded chip works like the original and reaches peak performance after 2 or 3 cycles

What this battery replaces

This Cameron Sino BAT003 is a direct replacement for the DLX LUXE IDOL TM40 X marker. It supplies 800mAh at 3.7V and matches the original 40.12 x 34.00 x 6.72mm form factor. The pack uses a lithium polymer cell and includes a fully decoded chip so the marker reads charge levels correctly.

Installation notes

The battery sits inside the grip frame and connects with the stock plug, so no soldering is required. Align the connector carefully before pressing it home; a misaligned pin will prevent the marker from powering on. Many users find online video guides helpful for the first swap. Allow two to three full charge cycles before judging runtime.

Check before ordering

Verify that your marker is the IDOL TM40 X model and that the original battery carries part number BAT003. Confirm the existing pack measures 40.12 x 34.00 x 6.72mm to ensure the replacement fits the compartment. This cell is not compatible with other DLX LUXE variants or aftermarket frames that use a different connector or footprint.

Highlights

  • Ready to power your DLX LUXE IDOL, TM40 or X with 800 mAh capacity
  • Slim 40.12 x 34.00 x 6.72 mm lithium-polymer cell fits the original battery bay
  • Certified to ISO 9001, RoHS and CE for safe, reliable operation
  • Built-in protection guards against over-charge, over-discharge and short circuits
  • Fully decoded chip works like the original and reaches peak performance after 2 or 3 cycles

Specifications

BrandCameron Sino
ModelIDOL, TM40, X
Part NumberBAT003
Specifications40.12 x 34.00 x 6.72
Typelithium_polymer
Battery Pack40.12 x 34.00 x 6.72
Battery Typelithium_polymer
Battery Capacity800.00 milliamp_hours
Battery Voltage3.70 volts_of_alternating_current

Questions about this item

How can I confirm the 3.7 V 800 mAh battery is working correctly after installation?

After fitting the pack, charge it fully then run the marker through two or three complete charge and discharge cycles; the voltage should hold at 3.7 V and the runtime should match the original 800 mAh rating.

What comes in the package and is anything else required?

The box contains one 40.12 × 34.00 × 6.72 mm lithium-polymer cell weighing 18 g with a pre-fitted connector; no extra cables, chargers or tools are included.

Which version should I pick for my DLX LUXE marker?

Choose this BAT003 pack only if your marker is an IDOL, TM40 or X model and the original battery carries the same BAT003 part number.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.